-
Celebrating 5 years of PedalPCB!
20% off all PCBs with coupon code "PEDALPCB" - Valid through 7/11/2022
-
-
Build a Bazz Fuss fuzz. It only has 6 components, and I found a follow along video. Article on the circuit... -
I did it the idiot way. (But it worked) I used my DMM to measure which leg was the variable one and which was fixed. Snipped the fixed...
-
A friend of mine who has owned two of my amps before asked me to build him something Voxy in a low wattage, with a master volume and a...
-
G.G. replied to the thread Water Slide Decal on Sparkle Paint.I tried a similar type of glitter paint on an enclosure. To get the right glitter coverage required a pretty thick buildup of paint, and...
-
G.G. replied to the thread This Week on the Breadboard: BJFe Arctic White Fuzz.I built a version of this a few years ago and also felt like the tone control needed more range. Should probably give this another try...
-
G.G. reacted to HamishR's post in the thread Well I built a Broadcast without the transformer with
Like.
Although it times it felt like I had just opened a box and tipped a bunch of electrolytic caps into it. 🤪 The pedal isn't finished yet... -
G.G. reacted to HamishR's post in the thread Well I built a Broadcast without the transformer with Like.
And I know it works! If you like you can add a single row at the top to get the resistors properly vertical but I was battling for...
-
Just finished up this General Tso compressor build yesterday! I've never really used compressors before, so I figured I'd build one...
-
The transistors were redacted via photoshop, to protect the identities of the innocent…
-
Damn bro, that’s so ugly the transistors left. :ROFLMAO:
-
G.G. replied to the thread How ugly is it allowed to be if it works?.is the ugly part on the back? :D Looks super neat and clean to me. Very cool project!!
-
G.G. reacted to vigilante398's post in the thread How ugly is it allowed to be if it works? with Love.
Tube preamp pedals are kind of my main thing, but I mostly use SMD so I can fit things in tight spaces. Well a friend of mine asked me...
-
Getting a little better at drilling these 6 hole pedals. I noticed that my pilot hole bit tends to wander even with a center punched...
-
G.G. replied to the thread Carlsbro Sound 2-Knob Fuzz!.:D I'll bet it would sound fantastic with a bridge P90 or an SG!
-
Love how it sounds! It screams "Feed me with some P90's"!
-
-
Loading…
-
Loading…