Grazza's latest activity

I have the same problem with 2 pedals, it's killing me trying to figure it out. I'm about to give them a really good audio probe, will...

fantastic to hear. Glad you got it going. It’s always such a relief when you do.

Yes I have the plastic covers on the pots. This has got me baffled, if i leave the jacks floating in the air, but everything in the...

It's the jacks, works with them floating in the air. Just don't understand what is causing it. they aren't touching anything they are...

replaced the bezel with a plastic one and put it in the box again and there is high pitched white noise again dammit, has to be shorting...

Now that I have the schematic I'll follow it through, I actually have 2 builds like this where they work and sound as they should but...

Solder bridge, IC 2 pin 6 and 7 or maybe it was the resistors next to it, must have done it when i did the repair and missed it. A bit...

Will do

Will try jumpering the connections in that area and see if I have a broken trace maybe?

Yes, I thought that last night, will change to a plastic bezel and see what happens. That got me on the pro 10 build too, LEDs very...

Thank you, I seem to have gain on only a few components, this will help greatly!

Does anyone have a schematic I can follow while I'm attempting to probe this one? There isn't one in the build docs

getting me a test platform next time is order some pcbs. Should have done it a long time ago

Ok, effect works when out side the box. Nothing real obvious as to why it doesnt work in side the box. If anyone is out there reading...

I thought I had swapped out the ICS, I'll try again. I have no audio at R13 and r14 and no audio at pin 7. I will pull it out of the box...