KR Sound
Latest activity Postings Media Albums About
-
-
It’s a cheap little Neje Master 2 I got a few years ago. I vectorize images and open them in Inkscape so I can save them as higher... -
This has been a few years in the making. I built most of the board before I lost some steam (and useable work space ugh) and took a...
-
Done.
-
GORVA EVERYTHING I dunno about everyone stateside, but Gorva enclosures are 6 bucks cheaper than Hammond stuff from DigiKey and mouser...
-
KR Sound replied to the thread Which soldering iron do you like?.@Robert Is it possible to merge this with https://forum.pedalpcb.com/threads/which-soldering-iron-do-you-like.16702/ So that all the...
-
Not to derail your thread or sound rude, but there's a search function here and this specific topic has been covered with lots of...
-
Even so, poor printing is not the problem here. As Joe discovered... Grab a resistor with the colour order as follows: Brown Red Black...
-
KR Sound reacted to Guardians of the analog's post in the thread SOLVED tayda UV printing issues lately with
Like.
I know we expect things to be as perfect as possible but to be able to get a fully customized powder coated and UV printed enclosure for... -
This is without a doubt the best analog delay diy has to offer IMO. I wanted another one for various reasons. I know a lot of people got...
-
KR Sound reacted to Erik S's post in the thread Duo-Phase Ticking (mainly when left side is engaged) with Like.
Ran mine like this and it's quiet. https://forum.pedalpcb.com/attachments/905dd26e-9f87-44c5-a8be-76899bd931d6-jpeg.46070/
-
KR Sound replied to the thread SOLVED tayda UV printing issues lately.That's cool that he refunded them.
-
KR Sound reacted to Fontelroy's post in the thread SOLVED tayda UV printing issues lately with Love.
This ain't my first rodeo with tayda printing on a black enclosure, but it's the first time they've refunded me for something and said...
-
KR Sound reacted to keyth72's post in the thread Anyone build a Terrarium with Daisy Seed v1.2 rev 7? (I'm getting unusually bad noise) - SOLVED with Like.
This fixed it, low pass filter right after the audio output of the daisy seed. Used 3.3k resistor and 2.2nF cap for a 22kHz low pass, as...
-
KR Sound replied to the thread Project thread process- designing and building pedals with a band for charity.Looks like the enclosures have just been drilled and painted. I finished up populating the boards and built one so that I can pre-cut...
-
-
KR Sound replied to the thread Resistor Value Question.Reds, browns, and blacks are always difficult to distinguish from each other when printed poorly.
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
