Jbanks

I’m trying to build a Muroidea for a friend of mine. He wants it to have no external knobs. He suggested trimpots on the inside to save...

Ok I solved it once and for all. When I took the. PCB out of the enclosure, a wire from the daughter board to the PCB had snapped. Quick...

Just when you thought it was over. I had both channels and LED’s working so I went to box it up. Was having grounding issues with the...

Thanks so much everyone on helping out. I checked continuity as GenXSlacker suggested and it passed all tests. I replaced the LED and...

Let's get the LED figured out first. There should be continuity between the points indicated by the green double arrow. There should...

Ok. I bought a new pair of wires and that helps. Now I get a beep on one of my DMM’s lol. Now after checking both the left 3pdt that...

I think my DMM is broke. I turned to what I’m pretty sure in the continuity tester. No beep when I touch tips together. No continuity on...

Check the switch first. Get your digital multimeter and put it in continuity mode. It usually has a little icon on it that indicates...

Very good point. Ok, how do I check continuity between the 3pdt and the LED? I’m assuming one point goes to the anode (+) side of the...

Ok. I’ll try replacing the 3pdt and daughter board.

Check continuity on the switch. It doesn't really take all that much heat to damage a stomp switch

Honest question: did you try flipping the leads? I always seem to screw up the legs for the LEDs at least 1 out of every 3ish builds.

Yeah I flipped the new LED just to double check and no luck.

I’ve finished the mini KoT and it sounds great but I can’t get the right LED to work. I’ve pulled it out of the enclosure and am testing...

The finished product. Thanks everyone. This pedal sounds incredible!