-
-
You really don’t want a sharp tip to solder that. You do want a good flux applicator, and either a small chisel (.03 to .04~ inch) or... -
Nostradoomus replied to the thread Happy Thanksgiving!.Just remember, the tryptophan in turkey isn’t making you sleepy…it’s just that you ate too much.
-
Nostradoomus replied to the thread SOLVED Ungula - little sound, must attack hard.Definitely the transistors. You’ll need germanium NPN, MPSA13 is not a sub for those!
-
Nostradoomus replied to the thread What do people like to use for LED's and bezels?.My god. I could have said “that’s what she said” so many times in this thread. I also countersink 3mm LEDs btw.
-
Nostradoomus reacted to Brett's post in the thread What do people like to use for LED's and bezels? with
Like.
I believe the term for that is “prairie dogging” :ROFLMAO: -
Nostradoomus replied to the thread Parentheses part selection advice.I use matched 1n5817 diodes in the ones I build (also going for obnoxious)
-
Nostradoomus replied to the thread Lightburn and a laser engraver question.I do the same. Also more passes at lower power helps! Haha
-
Nostradoomus reacted to vigilante398's post in the thread Lightburn and a laser engraver question with Like.
Back before I had a more workshop-friendly garage I used a small fan on one side and a soldering smoke absorber in a "push-pull" setup...
-
Nostradoomus replied to the thread Lightburn and a laser engraver question.I thought about building an acrylic case to go over mine with an extraction built in, would be pretty slick but the fact that all this...
-
Nostradoomus reacted to vigilante398's post in the thread Lightburn and a laser engraver question with Like.
The ink itself doesn't smell great if you're sniffing the bottles, but just running it doesn't have a noticeable smell. That's part of...
-
-
Loading…
-
Loading…