Recent content by pliolis

Will go with what you said

I will go with the mini but will finish other projects first ,I added a 47pf to the 470pf in the photon vibe this has added more low end thump ,no the low pot will not add that Wu Wu so it is cycling through the ldrs and adding that thump but a little brighter than the harbinger, Pedalpcb has...

So NPN does not work in mark 3 ,I have enough NPN and PNP for this project ,I have built all three pedals in I25B will be great to have all 3 in one enclosure ,waiting for pcbs to arrive .I have built a fulltone 69 which is great and a sunface with real NKT275s the needs biasing all the time

I have the harbinger by madbean ,and now have no more ldrs and light bulb ,banzai has them and smallbear ,I think the mini wil be the way Ill go after I have finished a few other pedals

https://www.freestompboxes.org/viewtopic.php?t=507&start=20, Hope I can post this here it is about the phasing caps ,the photon vibe seems to have the same caps as the Univox 915

If mk1 and MK2 are set for PNP ,set the voltage for NPN on the MK3 reverse the caps etc.,

Have you tried metal case BC108-9 ,BC186 , GuitarPCB sells BC108-9s reverse caps

Dosen''t seem to phase through the 4 ldrs like a univibe and is much more clean like the harbinger in modern mode .maybe one of the trimmers should be 250k,I have set it now ,didn''t blow the bulb .Not bad sounding.

I have built the photon vibe and it is nice sounding ,so far haven't been able to get the thumping low end which I get from my madbean harbinger, and it doesn''t seem to phase through the four ldrs like the harbinger, also what does Tr 1 do ,biasing instructions would be great ,TR2 and TR3 seem...

I built your BF2 and it worked well, Since then had a go at a Ibanez Fl-9 from Perf and PCB and can only get clean sound he wont supply voltages in fact he didn''t reply to my message his facebook page is more marketing than help ,so can you have a go at a pcb for that less parts than the BF-2...

Have you got the document for the super flare ,it is the only Pedal pcb project that has failed to work ,but far too many projects like this one without documents ,coming soon..................................................

I built it and it works ,on the other hand I failed three times with the bf-2 pcb from a Polish company ,so yes this is verified ,what I did was I though of it as two easy to build pcbs that are joined with header pins ,tried not to stress and think it was complicated and it worked .Good luck

There is a Polish company that has a pcb and a kit ,a larger pcb than say 125b ,I tried three times to build their flanger but failed first time I built the pedal pcb worked first time .

Thank you for your help!!!

I''m going to give it a go- how I said one switch ,just finished the Mark11 tonebender tried it with the Mark 1 tonebender really nice together, once I finish a Julia chorus I''ll give it a go.