spilla

So last week I built the Seabed Delay (Mad Professor Deep Blue Delay). Absolutely love it, it's the best sounding PT2399 delay I've...

What's a buffer? In the simplest terms, a buffer is a circuit that amplifies the current, but leaves the voltage unchanged. The perfect...

Ive got it working. I noticed the leds cathode ran to a via not directly to the footswitch pad. So i removed that jumper, pluged into my...

Sbrry mate, my first post was lacking a lot of details The ldr/led is working fine. It was the tremolo rate/bypass led. When removing...

Boxed my sproing deluxe but installed the tremolo led backwards. While removing the led I lifted the cathode pad. Now my tremolo section...

Would it be pssoible to get the sproing deluxe schematic? Ive lifted a pad and cant work out where it connects to. Cheers!

Finally finished my spacialist build. Pretty awesome fun reverb! Lots of settings. I knew I was going to have a hard time remembering...

Cheer man! thats VERY helpful!

Here is where I got all the tech data from there is a lot of different ways to approach it and none of it is super complicated, it’s a...

Update: 12-16-22 @Robert has released a revised version of this board to address the "white noise" hiss reported by a number of folks...

SOLVED I found the culprit. It was the 1N34A. I wasn't aware that a bad diode could cause a short. That was the problem entirely.

Sounds and looks great! Could you explain those mods in a bit more detail. I'm about to build another muff and would like to try...

Does the whole 9v rail have continuity with ground.. not just the 9v pad? Id remove D1 and see you still have continuity with 9v and...

https://docs.pedalpcb.com/project/drill/125B_5-Knob-Type-4.pdf

I have a problem. Listed below in chronological order with my thoughts. 1) PedalPCB Delegate (Boneyard) [magenta] - Smooth optical...