Help with 1590BBM fit two PCBs
- Thread starter Travis
- Start date
I would say no, the 1590BBMis 117.2mm x 90mm x 39mm
Both board are for a 125B which is 122mm x 66mm x 39.5mm
You should get a 1590XX, which is 145mm x 121mm x 39.5mm.
here’s a look at two 125B board in a 1590XX
Looks like the teh captain bit and CDXL are the width of the PCB on the right side on the picture. 90mm wide would not be enough to fit both. Just my humble opinion…
Both board are for a 125B which is 122mm x 66mm x 39.5mm
You should get a 1590XX, which is 145mm x 121mm x 39.5mm.
here’s a look at two 125B board in a 1590XX
Looks like the teh captain bit and CDXL are the width of the PCB on the right side on the picture. 90mm wide would not be enough to fit both. Just my humble opinion…
Kevinkemp33
New member
could you post a pic of the top side of that pedal please?
Sure... here it is...
You can find my build report here:
Frost Drive - RainCoat combo
This one was a tough one. This was only my second combo attempt. TS with Fuzz is always a good pairing. I build the combo with the ability to switch the order of the FX, so even tho it can be odd, with this one you can flip from TS into Fuzz or Fuzz into TS. i had a very hard time getting the...
forum.pedalpcb.com
I guess the size of the board matters... (that's what she says)...
You got a gut shot of that build ?
jimilee
Well-known member
Almost done with it. I’ll post pictures when I’m done.
Similar threads
