Source for Low-Pro caps?

[Big Monk]

Working on getting parts together for Round Two of ElectroVibe Mini/Monk Vibe Prototyping and I’m struggling to get 10u, 47u and 100u low profile caps.

1u in tantalum and 2.2u in tantalum I can get from Tayda and they are short enough.

Any good sources?

 

[Harry Klippton]

Did you even check mouser?

 

[Diynot]

Smallbear has them.

 

[Passinwind]

Working on getting parts together for Round Two of ElectroVibe Mini/Monk Vibe Prototyping and I’m struggling to get 10u, 47u and 100u low profile caps.

1u in tantalum and 2.2u in tantalum I can get from Tayda and they are short enough.

Any good sources?

Mouser sells Rubycon electros that are 5mm high IIRC. Plenty of 7mm ones too in normal times, but my usual go-tos have been out of stock for at least a year.

 

[MGB]

Hi,

Have you checked Newark ?... They have good deals for caps and diodes.
At the moment they have a Panasonic 10uf / 50V $ 0.046 cdn ... so +/- 0.03 USD each
That is only if 50V is good enough for you.
Capacitance: 10µF / 50V
Capacitance Tolerance: ± 20%
Product Diameter: 6.3mm
Product Height: 5mm

Panasonic ECE-A1HKS100B

 

[Big Monk]

Did you even check mouser?

I did! The filtering didn’t seem to return any 5mm/7mm height caps in stock that I needed.

Maybe I need to check again.

Mouser sells Rubycon electros that are 5mm high IIRC. Plenty of 7mm ones too in normal times, but my usual go-tos have been out of stock for at least a year.

I think this is the issue I’m running into.

 

[Big Monk]

Smallbear has them.

They’re only 16vDC though.

 

[Diynot]

The 10uf are actually 50v if you look at the options, but yeah, unfortunately the others are only 16.

 

[Passinwind]

I did! The filtering didn’t seem to return any 5mm/7mm height caps in stock that I needed.

Maybe I need to check again.



I think this is the issue I’m running into.

The Rubycons showed as being in stock a few minutes ago.

 

[Big Monk]

The Rubycons showed as being in stock a few minutes ago.

Shame, shame!

Ask @Harry Klippton and he’ll tell you I’m a seasoned component hunter. I must have selected the incorrect parameter for height.

 

[Harry Klippton]

What values are you looking for? I can give you part numbers off my labels

 

[Big Monk]

The 10uf are actually 50v if you look at the options, but yeah, unfortunately the others are only 16.

Good to know cause I need quite a few 10u

What values are you looking for? I can give you part numbers off my labels

1u, 10u, 47u and 100u

 

[Harry Klippton]

1u
140-SEA1R0M1HBK0407
140-SS01M1H0305P

10u
140-SS100M1E0505P

47u
140-SS470M1E0605P

100u
140-SS101M1E0805P

I'm not saying these are in stock, just that's what I've ordered there in the past

 

[Big Monk]

1u
140-SEA1R0M1HBK0407
140-SS01M1H0305P

10u
140-SS100M1E0505P

47u
140-SS470M1E0605P

100u
140-SS101M1E0805P

I'm not saying these are in stock, just that's what I've ordered there in the past

I’ve got to put in an end of year order from Mouser, SBE, PPCB, Aion and Tayda so I can build another E-Vibe Mini/Monk Vibe, finish my Cepheid, and build the Andromeda Deluxe.

 

[Passinwind]

Shame, shame!

Ask @Harry Klippton and he’ll tell you I’m a seasoned component hunter. I must have selected the incorrect parameter for height.

It’s not uncommon for dimensions to get swapped around or omitted in the Mouser and Digitech search engines, IME. It sometimes helps when you already have the part numbers, for sure.