Missing Build Docs / Schematics

[Robert]

Would it be possible to have the BOM for the Jack. Thank you

The John

The John

forum.pedalpcb.com

 

[ALPCDMD]

Appreciate it sir!

 

[cdwillis]

Robert, can you upload the schematic for the Chauffuer Overdrive (Schnobel Daily Driver), please?

 

[DGWVI]

Bumping for an Octarock schem. I've got one built up, but I'm having an issue with the sub octave and would like to get it sorted

 

[Idlebeach]

Can I get parts lists for :
Decadence Preamp &
Cleric Fuzz

 

[Billyhank]

Could I get a drill template for the Octarock please?

 

[Robert]

I'll get those schematics to you ASAP.

Cleric Fuzz

Cleric Fuzz

forum.pedalpcb.com

Decadence Preamp

Decadence Preamp

forum.pedalpcb.com

 

[Robert]

Could I get a drill template for the Octarock please?

https://docs.pedalpcb.com/project/drill/1590BB-DrillTemplate-Octarock.pdf

 

[Billyhank]

https://docs.pedalpcb.com/project/drill/1590BB-DrillTemplate-Octarock.pdf

Thank you!!

 

[Billyhank]

Could I get the wiring diagram for the Fordoble please?

 

[Robert]

The diagram isn't drawn up yet but it's pretty straightforward.

+/- go to the corresponding lugs of the DC jack.

IN goes to Input Jack Tip
OUT goes to Output Jack Tip
Each jack grounds to their nearest GND pad

The two 3PDT breakout boards are direct pin-for-pin connections.

See this build report for an example:

Fordable Boost+Drive

Very straightforward build, @Robert said it’s a little tight, and it is, so you should definitely put the 3PDTs in first, solder only one leg of each pot, and then get everything test-fit first before tightening all the nuts and soldering all the pots (which I guess technically you should do for...

forum.pedalpcb.com

 

[Billyhank]

The diagram isn't drawn up yet but it's pretty straightforward.

+/- go to the corresponding lugs of the DC jack.

IN goes to Input Jack Tip
OUT goes to Output Jack Tip
Each jack grounds to their nearest GND pad

The two 3PDT breakout boards are direct pin-for-pin connections.

See this build report for an example:

Fordable Boost+Drive

Very straightforward build, @Robert said it’s a little tight, and it is, so you should definitely put the 3PDTs in first, solder only one leg of each pot, and then get everything test-fit first before tightening all the nuts and soldering all the pots (which I guess technically you should do for...

forum.pedalpcb.com

Perfect! Thanks again!

 

[iamjackslackof]

Bumping for the Dual Effects Loop Switch schematic

 

[Robert]

Bumping for the Dual Effects Loop Switch schematic

There actually isn't a schematic for that one, it was manually routed freehand.

It's basically the same as this wiring diagram with the addition of two LEDs and current limiting resistors.

2-in-1 Pedal Wiring - PedalPCB Wiki

wiki.pedalpcb.com

 

[spilla]

Would it be pssoible to get the sproing deluxe schematic? Ive lifted a pad and cant work out where it connects to. Cheers!

 

[LukeFRC]

If the low tide mini docs are anytime soon I’m about to start my build (I’ll use the non mini ones with short caps in the meantime )

 

[LukeFRC]

… drill template the same as other 6 knobs like Sea machine?

 

[DGWVI]

… drill template the same as other 6 knobs like Sea machine?

Yep

 

[Idlebeach]

Can I get the drill templates for Decadence Preamp & Cleric Fuzz? Thanks a bunch! I tried finding ones that matched but they didn't seem quite right.

 

[Robert]

Sorry for the lack of responses, we're just getting over a week long illness here. Crawling my way back to reality now.

Quite a bit of shipping to catch up on, but I'll get these posted ASAP!