Monk McCoy

Big Monk

Well-known member
Took apart my Tearjerker a few months ago with an eye toward building something a bit more faithful to the Clyde McCoy.

Made a new badge for it and an “Echoes” switch cover to go over some old holes.

Sabbadius Halo was recycled along with the Tropical Fish.

I made a mistake and located the inductor too low in the enclosure so I had to drill out the standoffs in order to get it to seat low enough for the cover to go on.

Still needs to be dialed in and it needs a new base plate but here it be:

AF75C54A-4A43-405E-8850-3F05DE32481A.jpeg 8CBC5D38-F0DC-432A-B79F-F913B5D66A94.jpeg 7B8BABF3-CFFD-44B6-9DBF-A9294CA91FCB.jpeg
 
One issue I had is that my faceplate has the wrong labeling.

Rather than get a new one, I’m just going to try and flip the echoes switch board over so I can get the wires clean looking again.

Right now I just have it physically turned without rewiring and I’m not a fan.
 
Back
Top