Red Herring Mod!

Travis

Active member
Hi everyone!! How can I get less trebbly sound of this pedal?

I like the sound of the pedal but I feel a little bit to shiny..

Thanks you all!!!
 
I'd wager that increasing the values of C4 and/or C5 would do the trick. I'd keep the ratio between those two caps nearly the same at 1/10. So 2n2 for C5 and 22n for C4.
 
Thanks!!
I'd wager that increasing the values of C4 and/or C5 would do the trick. I'd keep the ratio between those two caps nearly the same at 1/10. So 2n2 for C5 and 22n for C4.


I also fell the byte knob is to harsh, will be enough changing c4 and c5?

thanks
 
While I've not built a Red Herring OD, it would seem that with C4 & C5 being part of the final filtering, changing those two to satisfactory value should suffice.n If not, try changing the value of C3. TBH, I'm not sure which change of C3 will do the trick. Don't be afraid to experiment.
 
do you recomend to me changue the circuit like the musico loco?? is look the same but the pot is inverted...
 
Hi!
I built my first pedal, the Red Herring.
I liked the result, however the Volume in 8 hours is already too high, and 9 hours is very high.
And the Gain is practically unchanged when turning the knob.
Bite and Cut are working correctly.
Could you give me tips on where the Volume and Gain problem could be?
thanks.
 
Back
Top