SOLVED Informant Gain and EQ Issue

Dpettine16

New member
I built the informant drive, it sounds relatively decent, but even with the Cut knob all the way down, it sounds like it is only loaded with bass. Very little highs coming through at all. I’ve also listened to some demos and it seems like my gain levels are extremely lower than what others have been achieving.
Any suggestions on what I should check first?
 

Attachments

  • DRV.jpg
    DRV.jpg
    326.9 KB · Views: 24
I have a lot of highs in mine--so much that I turn the cut knob up almost fully.

Check that C8 is making good connections. One pin should connect to a side of R8 and the other pin to ground.
 
Back
Top