"Sub Fuzz" - Waddlebox + Squidward

zipfool

Member
Resizer_16377264765340.jpg

Resizer_16377267156821.jpg
Resizer_16377267156820.jpg

Made this for a friend who plays bass. He uses something like Boss FX-25 with both knobs turned almost all the way down and it gives the bass a boost in the sub frequencies. He also wanted a unique fuzz tone added to it.

So, I combined Waddle Box with Squidward and found a way for them to share an RGB LED. I ordered the powder coated/UV printed enclosure from Tayda.

Lessons learned:
- Common anode RGB is the way to go for shared LED

- Always sand off the powder coating on the inside of the pedal, particularly where the jacks make contact. Same with the enclosure cover, where it makes contact.

- If you can ensure solid connections between the jacks and enclosure, there's really no need for more than 1 ground wire per PCB.
 

Attachments

  • IMG_23112021_192239_(1080_x_1080_pixel).jpg
    IMG_23112021_192239_(1080_x_1080_pixel).jpg
    419 KB · Views: 9
Gorgeous layout and execution!
Do you have the source of the illustration?
Sure, the original source of this illustration can be found on DepositPhotos:


I had to do quite a bit of work to get everything lined up and colored the way I wanted it.
 
Back
Top