Search results

  1. chongmagic

    Desoldering Station that actually works???

    I use this one.
  2. chongmagic

    Unfortunately my tuner is not tuning as well.

    Sorry, yes it is not working in true bypass. I can hear the relay click over when I turn on buffered bypass. The other relay clicks on when I plug in the pedal.
  3. chongmagic

    Unfortunately my tuner is not tuning as well.

    Looks like the stray wire was touching so I cut it. One of the NE555 chips was not seated as great as it could be so I reseated it. My voltages match what is in the build docs. It will work as a tuner now in buffered mode, but not in true bypass mode?
  4. chongmagic

    Unfortunately my tuner is not tuning as well.

    Also, just to have all culprits sorted out I doubled checked the board and I am not seeing any thing out of place.
  5. chongmagic

    Unfortunately my tuner is not tuning as well.

    I will try reseating the harness and going to try checking the voltages again. One of the NE555 chips does not seem to be seated properly going to try and reseat it as well.
  6. chongmagic

    Unfortunately my tuner is not tuning as well.

    I will try to push the pin out but I think it may be futile, anyways I ordered another screen just in case. I guess I am confused as the guide says the following: My harness is just missing the 19 green cable, shouldn't it technically still function?
  7. chongmagic

    Unfortunately my tuner is not tuning as well.

    When soldering on the ribbon cable, I managed to pull out one of the wires from the harness. It fires up, but the tuner does not work. Both relays are clicking on. Here are some pictures of the cable. If I need to buy another cable, is that a possibility?
  8. chongmagic

    125B Touch Screen is loose. Please delete, solved.

    I just finished this up a few days ago. Works perfectly but the touch screen is some what loose. Do I need to use the longer screws for the 125B size model?
  9. chongmagic

    PPCB Raincoat

    This is a great pedal, I hope you enjoy!
  10. chongmagic

    Bathtub Reverb - Issues

    Going back to this, where do I need to run the jumper?
  11. chongmagic

    Wrecking Ball lights up and then dies after applying power

    It was the power supply, works perfectly now.
  12. chongmagic

    Wrecking Ball lights up and then dies after applying power

    12v 300ma
  13. chongmagic

    Wrecking Ball lights up and then dies after applying power

    If I remove the IC it does die out. Any suggestions?
  14. chongmagic

    Fuzzdog Pedals Life Circuit

    Any idea as to why the ins and outs are switched? I have it wired exactly as above.
  15. chongmagic

    Fuzzdog Pedals Life Circuit

    Well the 3DPT boards are a little different than the diagram. Like I said the ins and outs are switched. Is the connection between J! and JO via the green lead necessary?
  16. chongmagic

    Fuzzdog Pedals Life Circuit

    Just wanted to bump and see if anyone had any suggestions?
  17. chongmagic

    Fuzzdog Pedals Life Circuit

    I am building this and the offboard wiring seems a little wonky. All LEDs engage but the in/out is backwards.
  18. chongmagic

    Look what my buddy found in his attic.

  19. chongmagic

    Look what my buddy found in his attic.

    Here is the actual front panel of the device.
  20. chongmagic

    Look what my buddy found in his attic.

    CRT
Back
Top