Search results

I’m still super excited about this one. It’s cool to see people getting theirs. Mine still taking a long way tour around Illinois 🙄. I’m not usually a mojo gal, but this one has a metal can LM301 waiting for it. And I plan to do three-way clipping with an on off on.

https://www.taydaelectronics.com/capacitors/bipolar-electrolytic-capacitors.html Tayda has a separate section for the bipolar ones.

I found them at Target.

Because the component values are printed right on the pcb. And this is diy. And calm the fuck down. Jesus…

Yup, a standard 100nf film cap.

If you look at their example build in the build doc. They used a film cap. That’s what I used in my build and it worked fine.

Yes, and you should be good there. Sorry, that’s all I have.

What exact part did you use for the charge pump? Certain versions make audible high pitch noise.

The duo phase does it, so you should be fine.

Beautifully, I might add.

I use these. https://www.taydaelectronics.com/1-uf-50v-multilayer-monolithic-ceramic-capacitor-x7r-jym-5705.html Half the price.

It might be easiest to just socket the diode spots and audition until you find your favorite 2. Most combos are going to sound fairly similar. High forward voltage LEDs like UV might not even noticeably clip at all.

It looks like if you use an on off on type switch the center position will be no clipping. I think that’s a quick way to get another option.

I had a snakeskin astroverb for a while. I hated that amp so much. I ripped off the tolex and stained and varnished the cab wood underneath.

https://forum.pedalpcb.com/threads/sproing-deluxe.13580/ The search function is your forum friend.

I see that and some long leads on the back of the pcb that could be touching. Hard to see through the flux.

Like this? or...

If you are getting no bypass signal then the footswitch and/or wiring is suspect. You should have bypass signal even when there's no power applied to the pedal.

from their ad copy: "switches that allow you to toggle between smooth TS-style symmetrical clipping and aggressive SD1-style asymmetrical clipping". they are toggling clipping diodes. Edit: the schematic is in the build doc.

Have you taken readings of its hfe and leakage? That will determine if it’s a functioning piece and what it can be used in.