Search results

It seems to be....

Was it this? https://forum.pedalpcb.com/threads/stupid-pedal-tricks-episode-1.6437/post-54031

Any reason you didn't solder the s-sn connections on the right?

What transistor did you use? It looks like you installed it backwards compared to the silkscreen. I just built this same pcb to the gc-1 spec last weekend and it worked with no issues.

You should really go ahead and make the jump to KiCad. I did and it is so much better.

Are you going to use the exp jacks? If not, you need to solder the T-TN, R-RN, and S-SN holes as shown in the build doc.

My guess would be wiring. I just built this about a month ago and haven't boxed it at all but it's definitely quiet with no hiss. Could you post some images of the front and back of the board?

The Nordland MT-11 is a boutique take on the MT-10 which is really great.. of course, coming from the mind that made the ODR, it's probably to be expected.

I won't say I'm great at PCB design, but I try to keep all power related things in one area of the PCB and then try not to have voltage and signal traces get too close to one another. I'd probably re layout your board trying to keep the power section away from the rest of your signal section.

I've built this but haven't boxed it and did a lot of the mods that were on the weird side and it's a lot of fun. I still haven't coaxed out the robot farts though.

I really love the 125B format for pedals but when you go up to two switches, 1590BB is the only way to go.

I built both the Alpha and Omega and they're both really great pedals. They even sound amazing with a guitar running through them.

The three you have shown look reasonable for the positions. I just built a ToneVendor Mk1, Tone Vendor Mk2, and a Soul Vendor using some Russian Germaniums that worked out really well. I referenced the values I had in all of them in this thread about a Tone Vendor MkI transistor choices...

You might want to add your upvote in the Project Wish list forum for the Wave Cannon Zero.

I'm a huge fan of voltage starve on fuzz circuits; I just ran out of room on this one. I guess that means I'll have a second revision at some point. :)

This one is a clear LED with a 1k-ish CLR. I built a second one with a purple LED and a 3k resistor but wasn't as vibrant.

I think I need to reroute a wire, but it isn't very noticeable when you're playing.

The Everlasting Tantrum is Dune Rise, which I first saw on @PedalBuilder's Polaris faceplate. The controls labels are Pirulen. Cryptid Effects is Marshosbn (aka The Mars Volta font).

Build report here: https://forum.pedalpcb.com/threads/the-everlasting-tantrum-an-enhanced-dod-grindhaus-fuzz.27202/

After seeing a request for an unreleased DOD / Devi Ever collaboration pedal and looking into it I decided to go ahead and use it as a learning exercise to move off of EasyEDA and into KiCAD for my PCB designs. Plus, I'm a huge fan of fuzz pedals, so it made a lot of sense in my mind. The...