Search results

  1. cooder

    What programs on Octagon and Module 8 eeprom?

    Sorry if this has been already answered elsewhere or I'm too blind to find it, but what effects are pre programmed on the Octagon and Module 8 eeproms? Both are compatible with the latest version Arachnid board, correct? Just weighing up if I go with those pre programmed one or with the custom...
  2. cooder

    Freak Fuzz aka Fuchsia Fuzz

    Some great sounding versatile fuzzynesss here, highly recommended. I built the treble/bass version, relay bypass board is homebrew. Recycled enclosure that had previous holes filled, then spray painted black inside.
  3. cooder

    Pinball Wizard multi fx unit

    I have posted about this extensively over at Madbean pedals and some of you might have seen it there, however since that is a 'members only' area 'll post it here as well. And there's some pedalpcb boards buried in there as well ;) Link to Madbean is here btw...
  4. cooder

    PT2399 at Mouser?

    Does Mouser not have PT2399 chips or am I just missing the right search on their site?!? I'm in particular looking for smd PT2399 (they seem out of stcok at Smallbear).
  5. cooder

    Recommendations for best 2N5952 Jfet substitute?

    What are you guys recommendations for substituting 2n5952 jfet with? I don't mind going smd, so would a mbf5457 or mbfj201 be a good replacement? Cheers!
  6. cooder

    Schematics coming soon....

    Schematics coming soon.... I know i keep on harping on about this like there's no tomorrow. I just like to learn and have them available for trouble shooting and comparing. Could we maybe have a section in the pedal wiki with just the schematics linked up, the ones to the existing pedalpcb...
  7. cooder

    What's the latest word on LED / LDR for Delegate comp/EQD Warden

    Title says it all, what's the consensus on the best combo? White LED (where sourced) and GL5516 LDR? Cheers!
  8. cooder

    NE555 as chargepump.... how does that work?

    Just looking at Vfe schematics to learn and understand stuff, Peter uses the NE555 chip which is dirt cheap as chargepump in some circuits. This example is from the Fiery Red Horse. Can someone explain me how that works and what voltages can we coax out of that, what are advantages and downsides...
  9. cooder

    Buxom and Mini Kliche

    Black Betty Boost/Buxom Boost. Nice versatile with the selectable tonestack and good output to drive the amp. Afterburner /Mini Kliche wired for true bypass (I know, sacrilege...) and relay bypass because I like it that way. I did resist doing any horsy or rainbow farts unicorn graphics.
  10. cooder

    Super Stevie versus Timmy versus...

    The Super stevie is just a bit of a modded Timmy is that right? Which has stricking similarities with Vemueram Jan Ray and Lovepedal 11 and... It would be good to be able to see the schematics please to understand and learn a bit what's happening there and where the similarities and differences are
  11. cooder

    Transistor recommendations for Fuchsia Fuzz?

    What would you guys recommend for the 2N1308 NPN transistor in Fuchsia Fuzz, what hfe and leakage am I shooting for? Suggestions for substitutions? Cheers!
  12. cooder

    M800 PAL 800 JCM Emulator run at 18V?

    Wondering if I can run the M800 / PAL 800 JCM Emulator with a charge pump at 18 V for increased headroom and punch as well as on 9V for 'normal' sound? Silly idea, yay or nay?
  13. cooder

    SoftII mods for more presence/ treble and less gain?

    So here's the thread to look into SoftII mods, I find my one for my taste a bit too boomy and muddy for missing better descriptions. Here's my original wording I started in another thread and Chuck suggested to do it as a thread of its own (good thinking 99!): "Same story of I'd like less bass...
  14. cooder

    Old School / Benson Pre

    Yep, another nice overdrive in the stable. Sounds great, cheers BuGG! Acrylic face plate over laser decal, relay bypass courtesy of 1776 fx.
  15. cooder

    What pcb design software would you guys recommend to get into?

    I have used Eagle in the past but thinking of getting into KiCAD, what's your guys recommendations in general and do you have recommendations for which tutorial series, resources and stuff are the best to look into? I did a quick google search and there's a bunch, just thought you might have...
  16. cooder

    Biasing Son of Ben preamp

    So I just populated the Son of Ben / Benson preamp board and it seems to work fine, just wondering about the recommended bias settings of trimmers. On schematic it says "adjust Trim 1 to 2K" while the other trimmers are given with drain volatges measured at transistor. The later makes more sense...
  17. cooder

    Vemuram Myriad Fuzz

    Vemuram Myriad Fuzz... anything out there like it and anything known about the insides?
  18. cooder

    Stellar Fuzz / Flugelhorn.

    Stellar Fuzz, take on Noel Cornet Revu Fuzz. All in all a nice BigMuff take with lesser gain and lesser mid scoop, nice singing sustain and all. First impression: I dig it. 2N5133 trannies, laser decal with acrylic faceplate, relay bypass courtesy 1776 fx. Fluegelhorn and violins singing in...
  19. cooder

    SoftII Fat Driver

    Quite versatile I find personally I like the lower gain settings best with bass dialed lower treble higher. There's certainly a lot of doom to be had with voice switch upper position and gobs of gain. Can get a bit too bassy IMO, but that's of course just a matter of taste. Quite versatile...
  20. cooder

    Fuchsia Fuzz Transistor set advice

    Howdy, I have a Fuchsia Fuzz in the works and wonder if you guys and gals can help me with some advice on what trannies to use. I have a PN 4393 will that work equivalent to the MBF4393 specified on build doc? Also: I do have BC550B and I think the BC550C specifiesd would have slightly higher...
Top