Search results

  1. P

    Runoff Groove Tri-vibe

    Just built this from a Fuzzdog pcb. Pretty cool project. The vibrato mode is impressive for such a low parts count. Very cool to read up on RoG site about the design process. The phaser mode (swirl) is cool, though sounds thin to me with my tele. The whirl mode is probably my favorite on this...
  2. P

    Big Muff - Green Russian

    Fairly straight ahead build of a big muff Using the values for green Russian. I only used the aion pcb because I prefer 1590B with side jacks. Initially I had planned on using mid knob which the aion pcb accommodates. But, after messing around in the “tsc in the web” calculator for quite a...
  3. P

    Photon Vibe

    Built this for a friend. Very cool pedal, still deciding what we’ll do for the art. The enclosure is sparkle green left over from an old mammoth order. This is my first experience with uni vibe sounding circuits, so I can’t compare, but lots of range available especially by adjusting the two...
  4. P

    SOLVED Photon Vibe ticking question

    Not sure if this is trouble shooting or if this is normal operation. I finished my photon vibe build and have been experimenting with TR2 and TR3. It seems very temperamental. There are many settings where there is a strong clicking sound and the signal even cuts out. So if I adjust one trimmer...
  5. P

    Transistor Measurement System

    I had my own pcb fabbed for measuring jfets Vp and Idss. I find it extremely convenient compared to setting it up on breadboard, or even a vero build, since I have board mounted DC jack and toggle switch (Vp / Idss switch), and some instructions printed on the board. I the circuit from here...
  6. P

    Diamond Bass Comp

    Built this as a commissioned request for a diamond bass comp. I found this pcb from lectric-fx made to fit in 1590B. I referenced the fsb diamond bass comp thread to find the value changes to make it like the bass version. The toggle switch on the side the is tilt EQ frequency (900/250Hz), dpdt...
  7. P

    Pale Green Comp

    Made this pale green compressor circuit from the tagboard layout. Sounds great, though a little bit “clicky” when the comp is turned up. This may have to do some with the led/ldr combo. Anyway, I added an attack knob described on the fsb thread, which is similar to how the EQD Warden is...
  8. P

    Chopped OC-2

    Built this from the vero layout here. http://vulcanofx.blogspot.com/2014/09/chopped-boss-oc-2.html Sounds awesome, really enjoying it. Compared it with my friends Boss OC-2 that I'm borrowing and it sounds comparable (minus the 2 Oct knob on the Boss). It is a pretty involved vero build (lot...
  9. P

    1985 Synth (Parasit Studio PCB)

    Pretty wild sounding, lots of fun. I put a SHO boost circuit on vero in there because with my tele it seems to track a bit better with some extra volume on the input. But too much and it gets really noisy/glitchy. Would probably work best with a noise gate before, but I don't have one of...
  10. P

    Supersonic Fuzz Gun + Octave Fuzz

    Here's a fun vero build that I worked up for a guy who contacted me based on a CL thread for some pedals I was selling. The left stomp is for a DBA Supersonic Fuzz Gun type circuit, and the right stomp is for a Bazz Fuss into Green Ringer (both BF and GR on together). The original concept was...
  11. P

    3 Projects for a Friend

    My friend who plays mostly bass (he plays guitar a bit too) had me do these 3 projects. He designed the decals and they turned out great, so it was fun work together on that and have him share some of the creative fun. This was my first time using solid white waterslide decal paper (for the...
  12. P

    C buffer stand alone (1590A)

    The main request I have for this would be for it to have a toggle switch (DPDT) to bypass the buffer. of course the switch could be omitted and just jumper the switch pads instead. The toggle switch would allow for easy mounting in the enclosure, but also promote flexibility and...
  13. P

    FV-1 Detuned Chorus (Pythagorus pcb)

    This is an adaptation of the Unison Double Tracker PedalPCB patch. I only used one fv-1 pot input (Depth), which controls the pitch shift up and down together. I had to adjust the code for pitch down, because in the PedalPCB version, the pitch down knob lowers the pitch twice as much as the...
  14. P

    Auto-wah (envelope controlled)

    I keep thinking about building an analog envelope autowah (maybe based on the Snow White auto wah). Now I’m curious if an fv-1 patch could suit me just as well for some of that flavor. Like the eqd spatial delivery. Bonus points if it can be hooked up to an expression pedal to operate like a...
  15. P

    Phase ii (w Blend Knob)

    The 1590B enclosures from Small Bear are slightly roomier on the inside than the ones from Tayda (because of the thinner walls). So, the 2.2" wide board just fits. Plus, this is a really cool blue color. The knobs are from Small Bear too. I meant to take a pic of the solder side of the board...
  16. P

    1981 DRV (Informant)

    Here's one I finished a few days ago. I don't normally post my vero builds here, but my understanding is that @PedalPCB gets credit for the trace they used on the tagboard site. Why did I go to the trouble to build it on vero instead of use the easy pcb here? I like to try to fit any pedal I...
  17. P

    Twin Face Input Cap

    I've been studying the twin face schematic among other online resources in preparation of a PNP Ge Fuzz Face build. There is only one input cap that both PNP and NPN circuits share. It is + on the input, and - toward Q1 Base. For PNP, this is good since the Q1 Base will have negative DC...
  18. P

    Arachnid - Dual Eeprom

    This is my 2nd Arachnid build, my first was the old version with the potentiometer to select patches. This new version with the 8-way switch is much nicer. Since PedalPCB hasn't released a dual eeprom board yet, I had to cobble together my own on perfboard. If @PedalPCB does release a dual...
  19. P

    Electrolytic Cap DC bleed (causes pop)

    In two recent builds, I have had issues with a loud pop when the pedal is activated or deactivated. One build was a reverb, and one build was a 4-channel buffer for a studio application, so technically I've had the issue 5 times. In each case, I observed DC voltage (0.3v~0.5v or so) on the PCB...
  20. P

    ADHD : Soft Clipping + Hard Clipping = Tighter Bass

    Title sounds strange but hear me out on this one. I built an OCD circuit (on vero) and when you reach a certain point on the gain knob, the bass gets kinda heavy and mushy. This is a cool sound in it's own way, but I was curious if there was a way to tighten it up. I used to own an EHX OD...
Top