Search results

  1. B

    Tayda Shipping

    I saw a post in another group with their email reply from Tayda. DHL has been removed from the option for the US due to a lack of flights and that UPS serves the same function. DHL was going to continue being used for other regions (like Asia).
  2. B

    Best 2 in 1 drive combos?

    I’ve only done a single 2 in 1 so far (two sticks of doom and an amentum boost). but I’ve placed an order with a bunch of drive pedals and am curious about what people would combine. Mercurial Boost Box and All EQ Soldat Distortion Graphite Distortion Chop Shop Greengage Overdrive My first...
  3. B

    What was your first PedalPCB build?

    Arkaim fuzz kit bought through Musikding since I’d never ordered parts before. Not my first build, but still had that beginner tingly feeling when it started back up! It’s still the heaviest fuzz I’ve built and I’ve built quite a few now. Highly recommend it to anyone who plays heavy music.
  4. B

    Low Tide Modulator Mockup Pedal - Arriving Soon!

    B1M was an acceptable replacement then? If Banzai is the only location available, i'd rather grab some B1M from Tayda than have to pay shipping from europe to Japan just for a pot or two...
  5. B

    Tagboard Blog

    Oh man, he has a Dunwich Volt Thrower up now... I just ordered the parts for the Olde Dirty Bass since it'll fill up my 18v input on my power supply, will probably have to order for that as well...
  6. B

    VFE Klein Bottle Redesign pre-orders

    Sounds like VFE is doing one final revision to his circuits before stopping all production of his own. With that, pre-orders for a revised Klein Bottle have started. $129 for DIY kit. Includes custom pots, smd soldering already finished, and pre-drilled bare enclosure. Not sure if he is capping...
  7. B

    EQD Crimson Drive or White Light

    Awesome! One of my first builds was an official White Light kit from Stewmac and it’s killer. Wish I’d snatched up the other EQD boards while they were still in stock.
  8. B

    Trembling Loon: Replacing Trem 'Silence' with Additional Input

    I have no technical help to provide with this. But since a tremolo works by modulating the volume, what you are really looking for is something or some way to modulate a signal blend, right? Would that even be moddable, or require an entirely different circuit design.
  9. B

    Parentheses Fuzz

    Thanks Chuck, your posts about the Sea Monk and Circulator convinced me to pick up those circuits. Looking forward to getting to them soon.
  10. B

    Parentheses Fuzz

    Thanks! Not knowing the drill size needed for the footswitches, my labeling was a bit too close. But not horrible.
  11. B

    Parentheses Fuzz

    Had the board sitting around completed while I tried to figure out the artwork. Finally, after rewatching some old Godzilla films again, I found a great artist named Attack Peter who does woodcuts of pop culture monsters. Woodcuts being a cousin to etched metal printing, these types of images...
  12. B


    I've been curious about the cricut. My printer still leaves some pinpoint holes in the toner that lets through the etching fluid, so the idea of using vinyl stencils was intriguing for some of the simpler designs. I haven't pulled the trigger on one because i've been worried about it not being...
  13. B

    Elk Big Muff Sustainar

    Haven't had a ton of time with it as I finished it pretty late into the evening. But it's definitely got it's own character with that tone knob change. It'll be fun to see the differences once I finish the other two variants and the op-amp muff.
  14. B

    Elk Big Muff Sustainar

    Bought 3 big muff circuits to make the Mask Us, a Green Russian and after seeing Nostradoomus talk about the Elk Gakki clone, I went and did some research and found that one of my favorite guitar players, Wata from Boris uses one. Super simple build to knock out while watching American Gods...
  15. B

    SOLVED No output from Duo-phase, Phaser B

    Using an audio probe, I traced the signal loss to resistor 29b (560 ohm) the phased signal comes off of C14B, but doesn't leave R29b to the output. I replaced it with a tested one, and still no luck. Phaser A's equivalent R29A works just fine and that side of the phaser functions as normal...
  16. B

    Arkaim Fuzz

    This was one of the first builds I ever did, when I was buying kits from Musikding. It is indeed a monster... Probably one of my favorite fuzz pedals, which means I should probably make more, haha.
  17. B

    What’s on deck for you?

    Thanks, I'm sure I can find lye easily enough. And yeah, it's about $3.00 a sheet for me. But I've had poor luck with fine details using other methods of transferring the toner, so I'm just gonna deal with it, lol.
  18. B

    Last two builds of 2020 (Deflector Reverb and veroboard Lastgasp Laboratories Rattle Crow)

    Yeah, it's definitely an "atmosphere" type reverb. I plan on lending it out to a friend to use with his synths in exchange for some recordings of the results, lol.
  19. B

    What’s on deck for you?

    Interesting, I need to find out what caustic soda is called in Japanese. My PnP is made by Techniks, not sure if that makes a difference. I'd say it's on the darker side of blue though. I still get spots where it doesn't want to adhere and I need to do touchups, but I recently read a post about...
  20. B

    Last two builds of 2020 (Deflector Reverb and veroboard Lastgasp Laboratories Rattle Crow)

    Yeah, I barely remember the first exhibit I saw of his back then, but was lucky enough when a museum in Tokyo held an exhibition of his lifes work. It was amazing. I listen to a lot of noise bands, so I can definitely see the Rattle Crow being used in that sort of situation. It also doesn't...