Search results

  1. D

    Boss to True Bypass

    I'm just gonna link to the old geofex article by R.G. Keen because it's what I used to figure out how to convert any pedal with a flip flop to a relay bypass. It's kind of a waste of a microcontroller for something that can be done through simpler means IMO, unless of course you're programming...
  2. D

    Amentum boost potential mods

    Increase the value of the coupling caps (C2, C3) to allow more than just treble frequencies through. You'll get more noticeable difference from the output cap but the input cap will have effect too. It's no different than modding a treble booster, because it is a treble booster.
  3. D

    Cheesemonger no fuzz in position 4 (all the way clockwise)

    Yes, that is normal behavior for the circuit in the gated mode.
  4. D

    Tweed Man - Too dark

    Try removing C2. If that makes it too bright, just try some values below 1nF till you get what you want.
  5. D

    Corduroy too muddy on Big settings

    There's several ways to reduce the bass response of that part of the circuit, some will have a greater effect than others. Changing C9 to a lower value, like .1uF or less will greatly reduce the bass response. Changing C7 to a lower value like .047uF will have a less prominent effect (maybe not...
  6. D

    Greengage Mode Switching

    You're gonna need to check continuity between pin 1 of IC2, R7, C3, and the wiper (pin 2) of the gain control (B1M). If you have connectivity between all of those components, run a bit of wire to the wiper (pin 2) of the gain control (B1M) from the center lug of the switch and you should be in...
  7. D

    Sabbath distortion

    You can also download a program called "Electronics Assistant" from if you're on a windows machine. It's got your basics on how to read resistor bands (literally just point and click the colors and it spits out the answer so it's easy to associate and learn) cap codes and...
  8. D

    Leprechaun TRS jack problem

    You're gonna need to ID pin number 9 to orient the jack to make sure you hook the rest up correctly. Pin 9 should be the eyelet that is near the threaded part and not on the back with the rest of the connections. So with 9 facing up, the pins facing you, top right is 1, down and to the left is...
  9. D

    Leprechaun TRS jack problem

    You need to pin out your jacks to see what is what because neither product you linked to has any sort of datasheet that I can find that would tell us what is switched and how. You need a TRS jack that will at the bare minimum switch the Tip. When nothing is plugged in to the jack, it should have...
  10. D

    Two Sticks of Derm Fuzz - Schematic?

    Kickass. I wasn't trying to be dismissive, I know you guys have a lot of stuff here and it takes time to sort it all out. Appreciate the quick response.
  11. D

    Two Sticks of Derm Fuzz - Schematic?

    If you (or anyone else) can post a good quality picture or two of the solder side of the PCB I can trace it out and draw up a schematic. I know PedalPCB will eventually put one in the build docs but there's no telling when that will be.