Search results

  1. PedalPCB

    Wanted: gut shots of a Proco Rat

    I can snap some pics for you tomorrow.
  2. PedalPCB

    [CONTEST] Sandspur Fuzz Video

    A little late to the party, but I've just increased the maximum number of poll choices.
  3. PedalPCB

    Electrovibe bulb?

    7371 bulb and 7532 photocell from Smallbear would be a good choice. I used the LDRs from Tayda (and they worked) but they aren't the optimal choice.
  4. PedalPCB

    MMBFJ201 JFET (Pre-Soldered) - When Are they Coming Back?

    I've been dragging my feet on this one, I just sent an email to the supplier to see about reordering.
  5. PedalPCB

    Missing Build Docs / Schematics

    https://www.pedalpcb.com/docs/1590BB-DrillTemplate_ElectroVibe.pdf
  6. PedalPCB

    Katana - pop when engaging boost switch

    Hahaha, we started doing that a few months ago too. They're so much easier to care for, just dust them off occasionally. I told my wife if she kills this one something is wrong. :ROFLMAO:
  7. PedalPCB

    Katana - pop when engaging boost switch

    Excellent! Love your implementation as well, nice and classy. :)
  8. PedalPCB

    Katana - pop when engaging boost switch

    It might help to add 1M bleed resistors from A1 to ground and B1 to ground.
  9. PedalPCB

    Panspermia.. anyone build one of these? Sustain control issue

    Try jumping a 10K resistor across these two points and see if it sounds more like you expected.
  10. PedalPCB

    Catalyst Delay - barely audible when pedal is engaged

    There was a fabrication error that affected a few of these in one batch. Send me a PM with your order number and date.
  11. PedalPCB

    Forum login vs store login

    The two sites are run on completely different software and servers, there isn't really a secure way to synchronize the two. Probably the easiest solution would be to login using your email address and use the same password on both sites.
  12. PedalPCB

    Does this exist? Female 1/4" to Male 1/4"?

    Something like this? https://www.sweetwater.com/store/detail/GPP290--hosa-gpp-290-1-4-inch-trs-female-to-1-4-inch-ts-male-adapter
  13. PedalPCB

    Low tide screen print

    Yes, follow your PCB. The only difference is the arrangement of the components.
  14. PedalPCB

    Electrovibe Mockup Pedal

    I'll have a wiring diagram drawn up soon, but in the meantime it's easy enough. The four center pads connect to the PCB. The pad on the far left goes to the tip of the input jack, the pad on the far right goes to the tip of the output jack. (The same as the standard wiring diagram here)
  15. PedalPCB

    Lamp (or Helping hands + lamp combo)

    I have one of these on my desk: https://www.harborfreight.com/fluorescent-magnifying-lamp-60643.html
  16. PedalPCB

    Hookup Wire #22 or #24. What is the right size for PedalPCB products.

    Niiiice, what exactly is that?
  17. PedalPCB

    Hookup Wire #22 or #24. What is the right size for PedalPCB products.

    I wire everything up after the boards are mounted in the enclosure. With stripped solid core I can just drop it straight through (navigate any needed bend with a dental tool), solder, and clip. Sometimes I leave a small piece of insulation on the wire to set the "depth" when I drop it through...
  18. PedalPCB

    Hookup Wire #22 or #24. What is the right size for PedalPCB products.

    I bought a pretty big roll several years ago... back when I was doing a fair amount of stripboard / etched PCB builds, all offboard hardware. The stuff was just so prone to break after being moved around a bit. If I had to pull a board back out for troubleshooting I'd always find several...
  19. PedalPCB

    Leprechaun Exp. Input produces harsh noise

    You wouldn't want to plug in a mono cable, that would have the same effect as plugging in your footswitch. A stereo cable with nothing on the other end would be similar to turning the Pitch control all the way down.
  20. PedalPCB

    Leprechaun Exp. Input produces harsh noise

    This is the problem. That jack is for an expression pedal, not a remote footswitch. I'd be willing to bet those footswitches are grounding the 3.3V supply (which is bad).
Top