Search results

  1. S

    Cornerstone Gladio

    Strangely, I only found an answer from Conerstone on TGP forum...don't know why they don't state it on their website?!
  2. S

    Low Tide

    Shit, I need this. @PedalPCB : do you think these will show up at musikding.de at some point of time?
  3. S

    Cornerstone Gladio

    What does the switch on the left side do? edit: nevermind, found the answer!
  4. S

    Problem with JHS @+

    sorry, haven't checked the forum for a while...I passed the information to my buddy (who owns the pedals) and will try to find out if it worked or not! Thanks!
  5. S

    Problem with JHS @+

    Could anybody tell me what could be the reason for this issue with the JHS @+? In the video (zipped since I couldn't attach otherwise) you see the working one first and then the one with the issue...the LEDs are low and the sound is weak; both channels behave the same, probably some powering...
  6. S

    Black Arts Toneworks PHARAOH (or Son of Pharaoh)

    This is the greatest Fuzz pedal out there...I'd love a PedalPCB version of it!
  7. S

    Arachnid - Dual Eeprom

    WOW, this is aweome! I'd love to get one (if you ship internationally....I think I'd replace the internal switch with an on/on-toggle and put it on the outside of the enclosure...)
  8. S

    Adventure Audio Glacial Zenith II

    had MkI and still kicking myself on selling it because it’s one of the best low/mid drive gains I’ve ever played
  9. S

    International Shipping Delays

    Same for Germany
  10. S

    JHS Double Barrel clone sounds like dying fuzz at times

    Ok, thanks. I think I can live with this since both are connected to one power output of a Cioks DC7 that delivers 660mA on that output...if that’s the only drawback, I won’t change anything and run the risk of breaking something...
  11. S

    JHS Double Barrel clone sounds like dying fuzz at times

    It was in the beginning....but faced the same problem after a while again. OK, so the real change came from swapping R3? Is there any disadvantage of leaving the 10k inside in the power section?
  12. S

    JHS Double Barrel clone sounds like dying fuzz at times

    I've changed all the 100k resistors in the power section to 10k and R3 (10M) in the TS-side to 1M....not facing any problems atm
  13. S

    Binaura Stereo FV-1

    This will probably be the last pedal I'll build myself...
  14. S

    JHS Double Barrel clone sounds like dying fuzz at times

    Ok, I really really thought it’s only my fault and disability to properly solder that this sounds as it sounds...but I have a second one built that behaves almost the same (It sounds great until you really start shredding, then the TS side starts to get fuzzy) and therefore i think that (besides...
  15. S

    New Build - Coda Effects Black Hole

    I've built one two years ago...sounds really nice!
  16. S

    JHS Double Barrel clone sounds like dying fuzz at times

    Yeah, this thing is driving me nuts :D Will try to check the BB section over the weekend, but I am pretty sure I haven't touched or replaced anything on the BB side...
  17. S

    JHS Double Barrel clone sounds like dying fuzz at times

    I replaced the diode and the two resistors, it now shows 4.2V again. I replaced the IC and re-soldered EVERYTHING...don't know what helped, but it is working now!!!! At least the TS side! Thanks a lot, man. Somehow I get a real loud beeping sound when I turn on the BB side now :D
  18. S

    JHS Double Barrel clone sounds like dying fuzz at times

    Could it be that IC2 got too much voltage due to the lately measured 8.6V? On the other hand, the sound was the same before the change...
  19. S

    JHS Double Barrel clone sounds like dying fuzz at times

    I just built myself a simple probe and checked some of the flow... The sound is clear until I reach the TL074...not sure if it's supposed to be like this, but on pins 5 & 10 I hear the clean/clear sound, on the pins 6/7/8/9 it's already fuzzy...obviously, everything after these parts in the...
  20. S

    JHS Double Barrel clone sounds like dying fuzz at times

    Hmm, one of the probes is touching ground (from the DC jack) and the other one leg of the particular component...
Top