Search results

  1. Bruce Feuillette

    SOLVED Deofol : how is it supposed to sound ?

    Ok, it's solved, the PCB is dead. The C1 capacitor was really quickly unsoldered and the soldering chips were gone too. It's the same for the C14 capacitor. 3 chips dead on 6. I don't have the patience (and the luck) to make jumpers at this point. I'm just fed up and disgusted.
  2. Bruce Feuillette

    SOLVED Deofol : how is it supposed to sound ?

    I've made more tests this morning and I will continue further. I used a white noise generator with frequencies from 20Hz to 22Khz. I tried different variations with the parameters : body, feed, tone and gain mainly. Here's the results. Gain is at 0 everytime. All knobs at 50% if not written...
  3. Bruce Feuillette

    SOLVED Deofol : how is it supposed to sound ?

    Hi! I took some minutes to record the sound I have. All the knobs are in the middle, then each one is moved to the min, then to the max. It's a Jackson with the bridge humbucker, on the Deofol, then on an AudioBox USB 96. I have just added a Ampire's cabinet to have a more "live" sound, but...
  4. Bruce Feuillette

    International Shipping Delays

    If I'm right, it's mainly because many States on the USA don't have VAT on importation. So, you're very lucky to avoid to deal with them. Until now, I was just unhappy with UPS' fees, but they were fine on the rest. But... I just had the worst delivery experience with DHL these past days, with...
  5. Bruce Feuillette

    International Shipping Delays

    I can confirm for France. UPS add an extra $18 for paying the VAT. If your grand total is $20, then it's $42 when it's delivered. 20% VAT on $20 and $18 for them, because they paid the $4 you owe. UPS, DHL, FedEx are carrier to avoid if you don't want extra fees. I ordered vinyl from Cody Jinks...
  6. Bruce Feuillette

    SOLVED Deofol : how is it supposed to sound ?

    Hi! I've played a bit with my Deofol, but I'm a bit disappointed by the sound. It's really full of bass and dark. Way far from the OKKO Diablo+ video on YouTube. Playing with Feed and Body only add basses to the sound. So I mainly add to cut both and put the gain to the max to achieve a clearer...
  7. Bruce Feuillette

    SOLVED Deofol Overdrive : low volume boost

    Done. It works way better! The boost is boosting, the whistle is gone. My neighbours are happy. :ROFLMAO: A huge thanks!
  8. Bruce Feuillette

    SOLVED Deofol Overdrive : low volume boost

    Argh !!!! How did I manage to swap them? I hope it would avoid me to dismantle the whole thing. I'll keep you informed of what happens.
  9. Bruce Feuillette

    SOLVED Deofol Overdrive : low volume boost

    Thanks for your reply. Here's the photo. And you're right. I've spent too much time on this... :oops: Here's the correct table Component Drain (V) Source (V) Gate (V) Q8 4.36 0.23 0 Q9 8.89 4.59 3.01 Q10 3.88 0.06 0 Q11 8.89 4.49 3.02 Q12 8.89 1.54 1.34 Q13 4.68 0.34 0 Q14 8.89...
  10. Bruce Feuillette

    SOLVED Deofol Overdrive : low volume boost

    Hello! I can't have the Boost mode functionnal. When it's on, the volume is getting really low. I've checked the voltage on all J201. It seems fine, to me. If somebody can confirm. Component Drain (V) Source (V) Gate (V) Q8 4.36 0.23 0 Q9 4.59 8.9 3.02 Q10 3.89 0.06 0 Q11 4.5 8.9 3.02...
  11. Bruce Feuillette

    Walrus Audio Ages Five-State Overdrive

    Interested too! :)
Top