Search results

  1. C

    Clandestine Preamp

    Sorry, just to be clear, it does get bumped up to around 26V, it's the 22V Zener that brings it down to about 22V.
  2. C

    Clandestine Preamp

    22.46V with a 9.37V supply.
  3. C

    Another Paragon

    I was seeing the same thing, then I cleared my browser's cache and it fixed it.
  4. C

    Another Paragon

    The post I referenced earlier has everything, I used that one as reference, then double checked against the KoT schematic that's been traced by the community, it checks out: https://forum.pedalpcb.com/threads/paragon-kot.1638/post-12872 For the record: Bump C10 and C11 up to 100uF Omit the...
  5. C

    Tape Machine Multi Head Delay with video demo

    That's super cool! Great job, @cooder!
  6. C

    Another DuoCast

    I'm a sucker for these Gørva enclosures.
  7. C

    Another DuoCast

    Thanks, Barry!
  8. C

    Another DuoCast

    No issues, the S90 is deeper than a 1590BB.
  9. C

    Another DuoCast

    Thanks, Chuck! Curious to hear your thoughts.
  10. C

    So, someone gave me a malfunctioning RAT 2

    I had the exact same situation happen to me recently. The gain pot was a little scratchy and it would actually drop the signal completely in some cases. I cleaned the pots and the footswitch with DeoxIT and it came back to life. Maybe try that before replacing anything.
  11. C

    XC Phase

    Interesting, thanks for the recommendation!
  12. C

    XC Phase

    I didn't have any 2N5952s when I built this, so I matched a set of 2N5457s with Vgs(off) -1.31V, which isn't very high, but the highest matched set I could find through my stash. Sounds decent, but not super lush.
  13. C

    Deflector Reverb with the most awesome art

    Amazing build, congrats @JamieJ! I'm gonna have to commission @jjjimi84 for a badass enclosure at some point!
  14. C

    The Terror: PedalPCB Aft

    Good stuff, Joe!
  15. C

    Carbon Black (EQD Black Ash)

    Well, that, kids, made my day! :love:
  16. C

    Splinters in my toes (but not ants in my eyes...)

    I would totally buy a couple!
  17. C

    Carbon Black (EQD Black Ash)

    New housing for this one too! My 6yo son helped me build this one, so he got to choose the artwork as well. Since we had built a Hulk Bender (MKII Tone Bender) together before, he chose Black Panther for this one.
  18. C

    XC Phase

    Thank you, all!
  19. C

    XC Phase

    New house is here! Tayda matte orange + UV print:
  20. C

    Breadboard a Rat

    My 4 LM308Ns from GuitarPCB read around 2.38KΩ between pins 1 and 5. :confused: My LM308AH metal cans read over 8MΩ.
Top