Search results

  1. Coda

    Stuff you wanted to know but were afraid to ask

    I believe Robert Fripp used one (or two) with the later version of Frippertronics too…
  2. Coda

    Stuff you wanted to know but were afraid to ask

    Here’s a serious one: when using SMD components (4 J201, for example) that have already been attached to adapter boards, should/can I keep the boards attached to each other and install them in one row on the PCB? Or should I separate them?…
  3. Coda

    Derailer Overdrive noisy when not playing

    Try moving your input/output cables are far away from the PCB as possible…it looks as if there is plenty to work with…
  4. Coda

    Stuff you wanted to know but were afraid to ask

    Why do we need another TS clone when the original circuit isn’t even all that good?…
  5. Coda

    Introducing... the Pterodactyl Phaser - AionFX Boss PH-1R clone...

    Very nice. I have one on my desk now…just waiting on Tayda. Yours looks better.
  6. Coda

    Stuff

    Yep. I still have it. It bet it would still work too…
  7. Coda

    Stuff

    That reminds me of the time I stepped on an OC139…
  8. Coda

    This Week on the Breadboard: The Stupid-Simple Compressor

    Will it make me sound like Mark Knopfler?…
  9. Coda

    Tone Bender Mk2 Transistors?....

    Yes. Make sure that you correctly identify the pcb component, though. Compare the schematics so you know which component is which; the ID’s for the PPCB board may not match the schematic used to bias your transistors…
  10. Coda

    Looking for a diy reverb with short delay time, non FV-1 based.

    +1. The Spirit Box is excellent…
  11. Coda

    Kliche Ge Diodes which ones do you go with?

    I would start by sorting through and finding diodes that have a forward voltage of 0.35v, and then just audition to find the best ones…
  12. Coda

    Stuff

    But can it sound like my 1972 Acoustic 134?…
  13. Coda

    SOLVED Cepheid Chorus No Chorus…

    Update: the pedal now works. The chips were the issue. Not sure which one, though.
  14. Coda

    Tech 21 Leeds

    How well does it do the Hiwatt “clean” tone?…
  15. Coda

    Magnetron (Mag Echo) - Low volume?

    This. PT2399’s are kind of across the board. Some are very bright and loud, some are dark and quiet. If you have others I would try swapping them till you find one that works. However… …this would also cause an issue.
  16. Coda

    Depot Fuzz problems

    Is anything grounding out against anything else? Bit of exposed wire, solder tit, something like that?…
  17. Coda

    Stuff

    How’s the Phase II?…
  18. Coda

    Stuff

    This thread is still fun…
  19. Coda

    Pot and Kettle. 2¢

    What’s the deal with the toggles?…
  20. Coda

    Quick Questions...

    Final update: looks like I got everything squared away. Thanks to all…
Top