Search results

  1. cooder

    DIPtrace footprint for Belton BTDR-3 pleeeease

    Can anyone point me or send me a DIPtrace library footprint for Belton BTDR-3 brick please? Thanx guys!
  2. cooder

    Not a pedal, this time speaker cabs.

    I built these two speaker cabs as I wanted something smaller than my 2x12 cab and why not. Also I found the idea of the bass reflex port ala Jackson amp works interesting, so for some experimenting I went for closed back with bottom reflex port and a parabolic shaped inner sound reflector. Also...
  3. cooder

    Yin Yang Machine, Univibe in a Wah shell.

    Univibe in a wah shell enclosure, built with Madbean Harbinger 2 board, highly recommended build to do, such fun to adjust speed while playing, addictive actually. I posted a lengthy pic heavy build log about this on 'the other forum' if you wanna have a look, some of you might have seen it...
  4. cooder

    Princeton Bluesbreaker analog thingy.... you know it.

    So this is a Prince with a ton of Tone, you know who I mean, you know the aristocratic lineage, the waiting list and all, right. Built after the original schematic added 9 to 18V charge pump circuit and onboard relay bypass. I had even some MA856 diodes floating around which I got years back...
  5. cooder

    Tape Machine Multi Head Delay with video demo

    This is based on the Hydra schematic with some modifications. Demo here (dry clean sound reference at 1:07 in video), no other fx used. I built the Hydra and I think it's great already stock, really recommend to build one, get your hands on the FV-1 and go for it! However I...
  6. cooder

    Infinity Press and Royalty Overrdrive

    Last boxing ups before the big guy comes through the chimney. Have a Merry Christmas everyone, stay happy and safe! First up is a cool wee collab with Dan @jjjimi84 . He nudged me to do a two in one pedal with his favourite boost and his favorite fuzz. How could I not oblige, sounds like a...
  7. cooder

    Swirl Machine thanks and big shout out to Mr. Fig!

    Finally had all the parts together to complete this super generous gift from Mr Fig. I scored this in one of his fab competitions, he sent it all the way down here very kind, Sir! Matched set of jfets and the board, all now sounding great and I dig it as alternative to my Mutron phaser, really...
  8. cooder

    Hydra aka Tape Machine

    I know I'm so lucky I had a FV-1 kicking around and it took a wee while through the maelstrom of international shipping, but I got the board and chip from the boss, and it was time to put it together. It's fantastic, when those chips are finally available again you all need to build one as well...
  9. cooder

    Trying to run asprogrammer but can't get English language going

    I'm trying to run asprommer as found here but it comes up with Russian language and not with the screenshot as shown in the wiki page. What the heck do I need to do to run it properly? Bit...
  10. cooder

    THAT 2159 chip supplier?

    Sos eeing the Creamety compressor out where would I be able to find a THAT2159 chip? I checked Mouser and Smallbear so far with no cigar.
  11. cooder

    Cap-less audio path?

    This OD boost ahs apparently no coupling caps in audio path, so how did they do that?
  12. cooder

    Sources for THAT 4301?

    Anyone know where I can get THAT4301 smd chips for the Muzzle, I can't seem to find them at Mouser or Smallbear. Cheers
  13. cooder

    Shipping rate to New Zealand, am I seeing right...?

    Been waiting for the Hydra to get back in stock, stuck it in cart and four EEPROMS to ship to New Zealand, cost $46 for part plus shipping $ 73.92. Am I seeing this correct, because that's a definite no for me. Ouch.
  14. cooder

    What programs on Octagon and Module 8 eeprom?

    Sorry if this has been already answered elsewhere or I'm too blind to find it, but what effects are pre programmed on the Octagon and Module 8 eeproms? Both are compatible with the latest version Arachnid board, correct? Just weighing up if I go with those pre programmed one or with the custom...
  15. cooder

    Freak Fuzz aka Fuchsia Fuzz

    Some great sounding versatile fuzzynesss here, highly recommended. I built the treble/bass version, relay bypass board is homebrew. Recycled enclosure that had previous holes filled, then spray painted black inside.
  16. cooder

    Pinball Wizard multi fx unit

    I have posted about this extensively over at Madbean pedals and some of you might have seen it there, however since that is a 'members only' area 'll post it here as well. And there's some pedalpcb boards buried in there as well ;) Link to Madbean is here btw...
  17. cooder

    PT2399 at Mouser?

    Does Mouser not have PT2399 chips or am I just missing the right search on their site?!? I'm in particular looking for smd PT2399 (they seem out of stcok at Smallbear).
  18. cooder

    Recommendations for best 2N5952 Jfet substitute?

    What are you guys recommendations for substituting 2n5952 jfet with? I don't mind going smd, so would a mbf5457 or mbfj201 be a good replacement? Cheers!
  19. cooder

    Schematics coming soon....

    Schematics coming soon.... I know i keep on harping on about this like there's no tomorrow. I just like to learn and have them available for trouble shooting and comparing. Could we maybe have a section in the pedal wiki with just the schematics linked up, the ones to the existing pedalpcb...
  20. cooder

    What's the latest word on LED / LDR for Delegate comp/EQD Warden

    Title says it all, what's the consensus on the best combo? White LED (where sourced) and GL5516 LDR? Cheers!