Search results

  1. DGWVI

    DEMO RAT Bastard (Sushi Box Lab Rat)

    Just posted this, it's got the same 220r/47u as this one
  2. DGWVI

    DEMO Lil BB Russian Rat (FuzzDog Mini Rat)

    Fairly straightforward Rat clone. My only changes were replacing the 560r/4.7u with 220r/47u(Juggernaut values), and adding a 470r resistor between lug 1 of the distortion pot and the board UD1408A for the chip, and D9K for the clippers Gets a lot fuzzier than a traditional Rat, and pairs...
  3. DGWVI

    DEMO RAT Bastard (Sushi Box Lab Rat)

    If you love Rats, the LR is a must build, imo. I'd suggest sticking with the stock values, and tweaking em if needed. Unless you want the failing-chip fuzz of course
  4. DGWVI

    DEMO RAT Bastard (Sushi Box Lab Rat)

    It is!!
  5. DGWVI

    DEMO RAT Bastard (Sushi Box Lab Rat)

    I've got one of the drop tuned Bax Rats on hand, I can do a shootout later or tomorrow. I vastly prefer the Lab Rat, though. It's got more depth to the low end, feels almost 3d in comparison or something. I've also got a Volt Thrower clone I can throw into the mix As for the Ruetz mod- I am...
  6. DGWVI

    Mini (or at least smaller) switched TRS jacks

    What are you trying to put the exp jacks in? For 125b / 1590N1, you can clip the top of the jack off with no ill effect and place it next to the footswitch - For 1590BBS and XX enclosures, I'll bend the lugs on the jack prior to soldering the wires on, or rotate them 90° -
  7. DGWVI

    DEMO edgy friend (Friendly Fire / Pulse Wave)

    I wasn't sure if as gonna like it, most of the YouTube demos are pretty meh. But it's damned fun on its own. Pumping into a cranked Rat is noisy as all get out, but it's heavy 🤘🏻🤘🏻 I've got a Two Sticks in the stack on the bench now, was thinking of pairing it with the Ginormous
  8. DGWVI

    DEMO edgy friend (Friendly Fire / Pulse Wave)

    First time with either of these fuzzes, and while I did make a couple minor tweaks, I love them both. Two totally different beasts that compliment each other really well. The Friendly Fire / FY-2 Companion gives you those reedy saxamaphone timbres, while the Pulse Wave / Square Wave spits out a...
  9. DGWVI

    DEMO Percolation Station (Harmonic Percolator)

    I also used a 20' Lava Retro Silent cable into the buffer, with Maka patch cable betwixt the pedals, 10' Lava cable to the amp. Voodoo Lab Pedal Power 3 Plus powering everything. The warm Northern California sun provided just the right temp for the 2N404A to perform optimally. The Fender...
  10. DGWVI

    DEMO Percolation Station (Harmonic Percolator)

    I should've added to the OP, that is is after a JFET buffer. It's much milder, and a bit less noisy straight from the guitar. I personally prefer the sound of it post-buffer, though
  11. DGWVI

    DEMO Percolation Station (Harmonic Percolator)

    Populated according to the build doc, except there's a 1.5k stopper between lug 1 of the Harmonics pot and ground. Box is by Scientific Uppercut, all the other hardware is typical stuff. Enclosure is difficult to photograph, but the sides are tennis ball green with lil silver speckles This has...
  12. DGWVI

    DEMO RAT Bastard (Sushi Box Lab Rat)

    Still honeymooning but, after the OG, this is my favorite take on the Rat. Definitely recommended 🤌
  13. DGWVI

    SOLVED Electrovibe. damn bulb doesn't fit :)

    Both issues will be solved with the use of a 1590BBS enclosure (1.67" vs the BB's 1.34" depth). You'd just have to make sure your jack holes stay closer to the bottom edge, but otherwise the template would be the same.
  14. DGWVI

    Sweepable low pass filter pedal

    There's the Tim Escobedo 9v MS-20 LPF (the Barn Owl is basically an amped up version) but the Escobedo version uses less parts and runs of standard 9v. Haven't built this version, but it sounds great, if these videos are anything to go by The attached PDF is for a similar 9v voltage...
  15. DGWVI

    DEMO Lil Buds (Harmonic Percolator, Axis, and Eric Johnson Fuzz Faces)

    Got these old Bud Mini boxes for a couple bucks, and wanted to make some cute nasty fuzzes. So far, I've done Lil HP - Harmonic Percolator (Big Clang spec BC177A / BC109C, with germ or led clipping). Added a 1k limiting cap to lug 1 of the input pot, and a 47n bleed across lugs 2&3 Lil AXFF -...
  16. DGWVI

    DEMO RAT Bastard (Sushi Box Lab Rat)

    It replaces the jfet buffer stage in the traditional Rat, and imparts a bit of its own personality
  17. DGWVI

    DEMO RAT Bastard (Sushi Box Lab Rat)

    It's not often that a Rat variant excite me more than an actual Rat... Tried others with various James or Baxandall add-ons, and they were always kinda meh. But, this thing fucking slays, and it's earned a permanent spot on my board Since this thing pumps out so much volume, is decided to...
  18. DGWVI

    DEMO Chaos Machine XL

    Added one toggle to cut the speed in half, another to drop the cutoff frequency in half, and a couple extra LFOs to modulate the primary. Increased the max resonance a bit. Intelligent Relays for both circuit and to engage the extra LFOs Here, have some doomiswirls Have a new recording...
  19. DGWVI

    EQ Before and After a Circuit?

    Akai G-Drive had pre and post distortion graphic eq
  20. DGWVI

    Sweepable low pass filter pedal

    This one has some quirks with the exp pedal that I'm not a fan of, but it can definitely do some dubby bass stuff. Here's the Designer's Page @Passinwind might be able to assist with some ideas
Back
Top