Search results

  1. K

    I don't have a B2K pot, would placing a B5K pot in this Bit Commander cause some kind of international incident?

    Awesome man thanks, will the pot still have it's full sweep range or will it max out at half way and make no difference from mid way up? (Not a major). I can likely find this answer elsewhere so tell me "jUsT gOoGlE iT" but how do I determine the resistor I want to use here?
  2. K

    Anyone recognize the order switch PCB used in this build?

    AH yep, that's u/RyanFromQA on Reddit. They haven't posted in 2 years but did a write up about that pedal here. They did design the PCB for the pedal and got it fabricated. They write about it here Just on that note, it's not that difficult to do once you've gotten familiar with schematics...
  3. K

    Anyone recognize the order switch PCB used in this build?

    I'm wondering who is able to control 3 footswitches in a row on in a 125B. That could very well be just a PCB the person who built it created for this project, I can't imagine anyone else being wild enough to do this. If you are literally after an order switch though, you can simply use one of...
  4. K

    In the context of Fuzz Factory, how much leak is too much for the AC128? Values inside…

    Thanks for the insight, I wonder, can I change the value of a resistor on one of the circuits that has the 500uA leak to something higher to bring the bias back down?
  5. K

    In the context of Fuzz Factory, how much leak is too much for the AC128? Values inside…

    Yeah the first five the photo are ~75hfe and the second five are ~120hfe which is what I requested, but I didn’t also ask for low leakage 🤦‍♂️ Yeah maybe next time but these are for 5 x fuzz factories
  6. K

    In the context of Fuzz Factory, how much leak is too much for the AC128? Values inside…

    I read all of it, there’s a couple links I’ll check out within that discussion but honestly the whole thing was quite cringe, that OP was trying to engage in a discussion and everyone else was handwaving them off with “why wouldn’t it”, “of course it’s like that”, or “you need to know more”.
  7. K

    In the context of Fuzz Factory, how much leak is too much for the AC128? Values inside…

    Thanks, that definitely gave me more to read about. I’m curious what the op amps role is in a Tonebender MKII, I’m at the point of trying to absorb as much information as possible about this sort of thing, it seems related more to the power section of the circuit
  8. K

    In the context of Fuzz Factory, how much leak is too much for the AC128? Values inside…

    1 v 7 You and me both! I did also read somewhere that the Q2 leakage doesn't seem to make a measurable difference in the FF, so I'm hoping for the best in just that one pedal (the one with over 500 on Q2). I'm building 5 of them so this batch will all be used. I'll just need to test them out...
  9. K

    The Dirt Doctor Overdrive (Barber Gain Changer SR)

    That’s true, but this is black, without the white is simulating a “multiply” blend mode. With black, you’re not multiplying any colour, so what difference would it make? Genuinely curious, have you tried no white layer underneath for black graphics like this?
  10. K

    AionFX Emerald (Boss PH-1R Phaser)

    How'd you find working with the Chromium enclosure? A couple years back people were having problems with the powdercoat chipping compared to others. What was your experience like?
  11. K

    Tap Tempo

    Is it high time you share your tap tempo class with us?
  12. K

    Here's how to show what "setting" you're on based on LED tally pattern, (bonus knob to encoder util included)

    Hello! Watch the video for a proper demo, but here's two very helpful utils that I've created. The first being LedOptionIndicator while(1) { int rotary_position = GetRotaryPosition(knob1); LedOptionIndicator(led2, rotary_position); System::Delay(1); }...
  13. K

    Anyone build a Terrarium with Daisy Seed v1.2 rev 7? (I'm getting unusually bad noise) - SOLVED

    Yes it’s soldered, I have another one in the mail, I’ll test Also to both you and @keyth72, I’ve only tried it into a USB interface and no amp model, I’ll run it into my Orange today and let you know what happens
  14. K

    Anyone build a Terrarium with Daisy Seed v1.2 rev 7? (I'm getting unusually bad noise) - SOLVED

    Not to throw a spanner in the works here but my Rev 7 is clear as a bell without the filter. It’s likely worth building it anyway for those that haven’t put theirs together yet
  15. K

    Right, so my Daisy Seed doesn't output any sound. More info inside.

    This was fixed, it was a broken 9V socket. The daisy seed can send power to the LEDs (I think?) so the IC wasn’t getting gas. Not sure if that’s what it was but replacing the socket worked
  16. K

    SOLVED I think this op amp is broken, looking for a sense check (mp3 files included)

    PSA: this was solved, it was a broken 9V power socket. I didn’t pick up on it because it Daisy Seed with fall back on USB power and can still trigger the LEDs even without 9V input, so I had working LEDs but not a working IC
Back
Top