Search results

well there are some sport, that are really messy! I'm sure the problem is your soldering job. There a too many parts that have too less soldering lead. Look at your purple wire, there is a lead that attache the green wire. You should always tint the wires with soldering lead before soldering...

Post a picture underneath, maybe there is a cold solder joint. C2 which is your capacitor that is melted from the soldering iron is in front of the input of the other IC and the other side went though the out Remind, that there also some parts between them, but if this one is broken, no signal...

From the pictures I think you wired the footswitch wrong. Edit: Sorry. The wiring on the Kliché Mini is different. Maybe the MKT condenser is broken, cause you attached the soldering iron on it. Check every single resistor.

@bechbox I paid roughly about 1200-1300€ for everything. Tubes are super expensive ! My Soldano-style front grill was also really expensive. So I think you can also get everything together for something like 1100€ if you not so picky like me.

Hey ! Jakob is an awesome guy and really helpful ! It's crazy that he shares his knowledge for everyone ! Yes I ordered directly from Rosamp. They are in Italy and the power transformer is compatible with nearly every voltage in the World. Just check the Rosamp page and take a closer look. I...

@Asdrael As already mentioned, the Kit is totally possible if you have some soldering experience. Everyone who started a high voltage project gets some experience from everywhere. I build one U87 clone mic and then made my first M49 tube microphone clone. So if you feel comfortable with it...

@Asdrael Wenn du noch fragen hast, dann schreib einfach eine PM, dann kann ich dir helfen. ;) Shot me a PM if you need any further help.

@Asdrael the Mod for Bias points is a bit more tricky than you think. You also have to put some resistors in series to the bias points. And to be honest, if you not change the power tubes every week you don't need it.

@Asdrael tough question. The documentation is really well and nearly like painting with numbers, but you have to be really serious about the fact that handling with high voltages is really dangerous. The soldering on its own is not the problem. The tough part is firing up the amp the first time...

Of course I do. The "OCD" font called Balloon. Input/Output/Drive/Tone and Volume is Comic Sans. 9vcd is Arial and "Fulltone inspired" is font Brush Script.

Hey folks, thought about some all-time classic Overdrive pedals and OCD full tone came in my mind. I ordered the pcb and the other parts. Made a huge mistakes for my UV template. I used the same fonts like Fulltone and tried the "balloon" font to write ADHD. First I try OCD to look if it's the...

Second build I want to show. Ask my buddy what we need for the studio and he told me, that a Fuzz would be nice. So I looked at the shop for an Fuzz pedal and this took my interest. Really good layout and everything was done within one hour. Housing is from Tayda and the UV-Template made by...

Hey guys, as some of you may know, that I originally play drums and have a small recording studio with my buddy who plays guitar. I ask him which pedal we might need for recording and he told me a Klon Centaur with a smile. I told him: "okay, lets buy it" and he was like: "yeah dude, good...

hey guys, I'm trying Adobe Illustrator for a month and I've a question. The reference point for drilling with Tayda is always the middle. How can I make my reference point at Illustrator in the middle ? My reference point is always on the top left (0/0). I really hope, that you can help me. I...

There should also be enough place at the chassis to add a potentiometer for the FX-Loop. I also think about adding bias points at the chassis first, but then I was to lazy, then I don't wanted to damage the chassis with extra drill holes (I HATE drilling metal) and then I was like: "Okay, you...

I think you can use the wiring from the SLO 100 for the fx loop.

Great work ! Really nice UV print! My Kewpie Fuzz is also ready, I'm just waiting for my enclosure from Tayda.

I want to build the ADHD, do you maybe have a drilling template for Tayda ?

@Ale_jellybelly i don’t know which shipping company ships to Italy, but I get the enclosures from DHL express. There are the VAT and customs included. So I have never payed customs on my last orders.

Yes, I'm German. I really like the noise gate Pedal. I usually use it in my little home recording studio for reamping mostly rock and metal guitar playing. The decay is, for me, perfect and it is the most used pedal. Which labeling do you mean? I get lots of help from @SYLV9ST9R, cause I had...