Search results

That was exactly the problem! Thanks so much! Feel kind of boneheaded for missing that.

Here are the internals.

So I recently put together a caesar build and most of it seems to be in order except the effected signal is pretty low. When the blend is maxed there is a significant volume drop. I did some audio probing and it seems like the volume is where it should be on the output pin of the BBD. Any advice...

Bumping this to say that I pulled out one of the JFET boards that was touching an IC socket and it seems like after resoldering that it looks a lot better but still no signal when engaged.

So I finished up my build of the minnow and I have no sound. I'm testing in the auditorium. It passes clean signal when bypassed and both the LEDs come on when powered. It seems the rate LED is functioning properly. This is my first time working with the SMD 201 boards so I'm not sure if I made...

Thank you! I hadn't even thought of using a 4PDT but that makes a lot of sense! I was already thinking I'd have to upsize from the 125B. I'll have to measure it out but I figure it could probably fit into a 1590BB. Really appreciate the help!

So I'm working on a Minnow build and I was thinking about wiring a stomp switch to the 3PDT mode switch. I'm fairly new to this so I figure there could be something I'm overlooking with it but I was planning on just running wires from the PCB down to a switch. The part that I'm having more...