Search results

  1. F

    6 Band EQ + Cracklejack 2 in 1? Advice?

    I have pcbs for the 6 Band EQ as well as the Cracklejack. I also have a 1590C enclosure and since there isn't a "level" for volume boost on the EQ, I thought it might be fun to try putting them together in one enclosure. My plan is to place this combo pedal after my drive pedals for tone...
  2. F

    Kliche' Mini - Film caps in place of electrolytic?

    Hello. Would it be harmful or compromising to use 1uf WIMA film caps in places where the BOM calls for Electrolytic? I accidentally ordered the WIMA caps. Whoops!
  3. F

    Kliche' Mini Mod true-bypass / buffer switch?

    Hello! Wondering if it would be possible, or even make sense, to build a Kliche' Mini and mod it so that the bypass/buffer can be turned off/on? Depending on where I put the pedal on my board I may not prefer to have the buffer on in some configurations. If I remember correctly, I believe...
  4. F

    Crackle Jack 2nd output?

    Hello! So I have a Crackle Jack pcb that I'd really like to add a 2nd output to for a tuner. Back in the day I used to have an original Zvex SHO that I'd use for this and I'd love to do the same with this Crackle Jack if possible. The Crackle Jack IS supposed to be a SHO clone right? Only...
  5. F

    Duocast Gain Pot not working

    I rehoused my Duocast today and I'm having an issue where the Gain/Trim pot makes not change at all when turned. Internally I have the low gain trimpot pretty low and the high trimpot pretty high. Everything else works perfectly and it sounds really great. It's just that the "low gain" side...
  6. F

    Southern Belle 1n5817 schottky diode equivalent?

    Hello! Building a Southern Belle and wondering if there is an equivalent alternative for the 1n5817 Schottky diode? Or something "close enough". Thanks!
  7. F

    Splitter/Dual amp box

    I think it'd be great to have DIY project for a splitter box that allows you to use two amps that SAFELY solves the grounding issues. Something that does the job of the full tone ABY or a Humdinger from Gig Rig.
  8. F

    Duocast Low Cut Not Working

    I'm really digging the DuoCast build I finished up today. Only problem is that the Low Cut knob does nothing. Everything else works. I've built the Simulcast as well so I expected the Low cut to function in a similar way to that. No change across the entire sweep. The lug connections are...
  9. F

    Dual Pedal Mach 1 & General Tso's.

    I love my Mach 1 and have been itching to get a comp back on my board. I had a Keeley Aria for a while but sold it. It was a nice tool and being able to switch the order was useful for different tones. So that was the inspiration for the build. I personally love the Mach 1/Lightspeed as a first...
  10. F

    Order Switch with a True Bypass & Buffered Bypass 2 in 1?

    Happy Saturday! Hoping this is the right place for this question. I'm nearing the end of a 2 in 1 build with an effect order switch for the Mach 1 and General Tso's. (Hopefully!) Using PedalPCB mini boards for both footswitches, order toggle and for the power. I did not realize the Tso's was a...
  11. F

    Voltage rating on C6 capacitor for General Tso's

    Would 10V be a high enough voltage rating for the 100uf capacitor at C6 on the General Tso's compressor? I seem to remember reading somewhere that in general with pedals, it's best to use caps with voltages of 18V or higher. Just wondering if I can get away with 10V in this instance. Thanks!
  12. F

    Combining 2 Mach 1's and a General Tso's in 1 box

    Just trying to plan ahead while waiting for remaining parts to arrive. What should I lookout for in attempting this build? I welcome a heads up if I'm missing something. I'm wondering if it's safe and efficient to power all 3 from one 9V jack? My goal is to have 2 Mach 1 drives AND a General...
  13. F

    Fuzz Foundry transistor orientation?

    Could anyone confirm the orientation for a pair of 2n3906 PNP transistors on the Fuzz Foundry? There is a flat side on these transistors but I'm not sure which direction it should go in relation to the pcb and the tab marking. I'd hate to mess up my only pair.
  14. F

    Simulcast too bright?

    I completed my Simulcast build and love it! The one downside to me and my rig, is that it's a bit too bright and harsh for me sometimes, even when the low-cut is OFF the top end is a bit "ice picky" to my ear. Is there a mod suggestion to roll off some of the high end? Maybe adding a treble cut...
  15. F

    Mach 1 Overdrive C2 what kind?

    Nearly done with my Mach 1 build. When populating the board I realized that I had ordered an electrolytic cap for C2. When I noticed the pcb has no polarity I got confused so I looked at google images of other Mach 1 builds and saw that no one else using an electrolytic cap in this spot. I...
  16. F

    Mach 1 Overdrive mods?

    Hello. Wondering if anyone might be familiar enough with the Mach 1 circuit to suggest mod possibilities for this particular pcb? I have an original Greer Lightspeed and I've heard that Greer's Southland pedal picks up where the Lightspeed leaves off so to speak. Basically, if there was a...
  17. F

    Simulcast R12 value?

    I'm populating my pcb for the Simulcast today. I somehow missed ordering a 450 ohm resistor for R12. I happen to have a spare 470 ohm handy from an old build. Would it be close enough? What might the difference be if noticeable? Can't wait to finish this build! Thanks!
  18. F

    Simulcast toggle switch?

    Hi there! Starting to source my components for a Simulcast build. Sorry this might be a boring question. Am I correct in assuming the toggle switch is an SPDT?
  19. F

    3pdt Toggle for Dual Pedal

    Hello PedalPCB crew! Stoked to find this resource and I can't wait to build a kit from here very soon. I digress... So I already have a 3pdt on/on toggle switch and I ordered a pcb from here to complete a dual pedal build I've started with an "order toggle". I'm trying to map out all the wiring...
Back
Top