Search results

  1. ANGRY_SWEDE

    Decadence preamp

    Since there is no scheme uploaded to the site, I need to ask for clarification. Is the "100p" at the bottom of the PCB (just above the LED) correct? The silkscreen has a comically oversized footprint and lead spacing (as do the other 2 "100p") for such a small cap value. Maybe it is supposed to...
  2. ANGRY_SWEDE

    Parentheses Fuzz

    Finished this one recently...
  3. ANGRY_SWEDE

    PedalPCB Muzzle (classic)

    Acid-etched enclosure. I separated the single dual LED to have clear indicators per function. Range (sensitivity) switch mounted for external convenience.
  4. ANGRY_SWEDE

    PLEASE DELETE

    resolved
  5. ANGRY_SWEDE

    Guvernator w one simple mod

    Just finished this and I'm pleased. I used an audio pot vs the linear for the LEVEL as the BOM stated. I like having that jump right about the 3 o'clock setting. These have a ton of low end. Socket the LEDs to experiment in the future. I have a red and yellow in now. I went with a 1590bb to have...
  6. ANGRY_SWEDE

    Promethium switchable hard clipping question

    I am wanting to use a 3pdt as a hard-clipping switch between two sets of diodes. Am I correct in thinking the anode pad of D6 would be the "send" and the kathode pad of D7 would be the "return?" Thank you in advance for any suggestions, cheers!
  7. ANGRY_SWEDE

    Thermionic Deluxe -build-

    Built this for a friend who gave me a bass guitar. Cool dual OD pedal.
  8. ANGRY_SWEDE

    Thermionic Deluxe testing issue...

    My usual "go-to" method for testing a circuit is to simply connect [+] [-] IN and OUT of each channel. Is this not possible to test each channel of the Thermionic Deluxe individually w/o everything being wired together? My breakout box was connected to IN and OUT pads in place of 3PDT, but I was...
  9. ANGRY_SWEDE

    My PedalPCB collection to date...

    First to last... Hyped Fuzz, Stereo Heterodyne Receiver, Leprechaun, Caesar Chorus, Greengage, Chela, Promethium, Spirit Box, Parentheses Fuzz, Dark Rift Delay.
  10. ANGRY_SWEDE

    SuperHeterodyne Receiver rotary switch order???

    Is the SuperHeterodyne Receiver rotary switch order the same as the pedal that it is "compared" to? I've seen some artwork that was identical to the comparative pedal and just wanted to make sure before I committed to a layout design. Thank you!
  11. ANGRY_SWEDE

    Promethium pot "delete" mod

    I want to have the Vol, Low, and High set to max without the use of internal trimmers. Is that as simple as bridging pads 2 and 3 with an equivalent value resistor? Also, wouldn't a shunt of wire bridging pads 1 and 2 be needed also, as to divert any "leftover" signal/noise? Thanks in advance!
  12. ANGRY_SWEDE

    Parentheses Fuzz

    Just finished this one and it is pure destruction! Follow the build guide and match your diodes for proper octave response, mine was right at 3.50. Straight forward easy build for being a larger board. I really had a lot of fun with this build.
  13. ANGRY_SWEDE

    Parentheses rotary switch order

    I wanted to check if I have the order correct regarding the [4 position] rotary switch. L to R / Clockwise, as follows... OpAmp, Asymmetrical, Symmetrical, Ge? -Thank you in advance!
  14. ANGRY_SWEDE

    Parentheses rotary switch order?

    I wanted to check if I have the order correct regarding the [4 position] rotary switch. L to R / Clockwise, as follows... OpAmp, Asymmetrical, Symmetrical, Ge? -Thank you in advance!
  15. ANGRY_SWEDE

    Leprechaun

    I just finished my Leprechaun build [with expression jack] and it sounds just as I hoped it would!
  16. ANGRY_SWEDE

    Parentheses rotary order

    I wanted to check if I have the order correct regarding the [4 position] rotary switch. L to R / Clockwise, as follows... OpAmp, Asymmetrical, Symmetrical, Ge? -Thank you in advance!
  17. ANGRY_SWEDE

    Muroidea [Rat] I.C.

    Any suggestions/recommendations for an IC other than the LM308N, for the "Muroidea?" I was thinking about a TL071. Cheers!
  18. ANGRY_SWEDE

    Hyped Fuzz and Triangulum [build]

    Here are two recent PedalPCB builds of mine; Triangulum (33) and a Hyped Fuzz (FZ-2). This Triangulum is a blessing for my block letter 5150! PedalPCB has the best, most organized, and well thought out DIY PCB's.
  19. ANGRY_SWEDE

    Leprechaun pots layout

    I am in the process of designing artwork for my Leprechaun build and I have noticed many other diy-er's seeming to label their Leprechauns "incorrectly." Are y'all going off of the Rainbow Machine layout, or am I missing something? The "regeneration/magic" control looks to be getting labeled as...
Back
Top