Search results

In the Beatle Juice, R15 calls for 120R. The one 120R I have is measuring 10k but I do have a 130R. Is that close enough? If I am reading the schematic correctly its in the power section of the circuit(?).

Here's my finished Black Eye. I had it working and then went back in and added the bass switch that has been talked about on this forum. I'm glad I did because it makes it more versatile. I first tried a 12AT7 in v1 because I heard how much gain it had, and how @MichaelW felt it gave the Gain...

Planning a build for this pedal. I have an unused pre-drilled Tayda 4 knob 125b enclosure. After seeing the Two Tone build report posted today, it looks as though a 4 knob, plus two more holes for the switches, would work. Sound right? And I have a Small Bear "3-knob Tone Bender PNP Generic"...

Anyone have a Tayda drill template for the Candid Drive? I searched and didn't see one. And the Two Tone Fuzz also?

Is there a BOM floating around for the Two Tone fuzz?

Suddenly the Tube Screamer part of my Kentauraide / Tim combo pedal is making a hissy sound. It was previously quiet. Any usual culprits to this kind that of thing?? Here's a demonstration: The Build Report: https://forum.pedalpcb.com/threads/tres-hombres-custom-2-in-1.17123/

I used a 1590BB2 for this so I could have the extra millimeters of working room. I modified the 1590BB drill template available for 1590BB2. It worked out great! I'm currently reading the book in the Revolver box set and listening to all the outtakes so I've got Revolver on the brain. I also...

It doesn't say on the page but will the new Beatle Juice Fuzz fit in a standard PedalPCB 3 knob enclosure from Tayda?

Building the Pharmacist and my A25k pot for the MIDS doesn't have a washer or nut. Don't know how that happened. I have a B25k, will that work? Is it just that the taper will be direct vs that curved line of the A pots?

I wanted to build this one after hearing Tom Cram on the JHS channel talking about his return to DOD/Digitech. It certainly does have a lot of different sounds based on the knob position as others here have said. Pretty cool!

Thanks to @szukalski or making the files available to make PCBs. And thanks to the many who chimed in on my Troubleshooting thread that still has me scratching my head. This one had a long road to completion, my longest, and it was a bugger right to the very end. One thing, I do like the...

Being what I consider an "experienced beginner" at pedal building, I don't mind having the few extra millimeters of space that a 1590BB2 gives vs. a 1590BB. What would happen if I submit a pre-made Tayda drill template for a 1590BB (for the Pharmacist and Black Eye for specifically) but change...

I had not been able to do any pedal building for about 6 weeks due to work, travel, Covid and more work, so this week I was able to finish 2 that were in progress. One was a second Mahayana that I built for my brother in law because he liked the one I made for myself so much. The other was this...

I'm testing my in-progress Blue Sheep in my Auditorium Test Platform, I am getting a bypass signal, but when switching to Active, there is a "pop" but then no signal. I have continuity between the Test Platform and the PCB on all the connections, I don't see any solder bridges and the Platform...

I bought a few of these boards recently, what value resistor and trim pot should I use? https://www.pedalpcb.com/product/pcb595/

One for me, one for my brother in law for his birthday next month. This thing is so versatile. It's good as a tone shaper in to a clean or dirty amp, a boost into clean amp, boost into dirty amp...and I haven't yet had a chance to try it as a preamp. I have an Orange OR15 with EL84 tubes that...

I bought the Aberration Fuzz in the sale this Weekend and have a couple questions. 1. I assume the board is designed to fit in a Tayda 3 knob 125B, yeah? 2. I have some BC109 transistors, can that be substituted for the BC107B listed in the BOM? 3. For the MP38A, I found these on eBay that...

I am assembling the Diplomat from Sushi FX. It contains a 100uH 2A Inductor, which I have never used. Just making sure that there is no polarity requirement for adding this part. I don't see any markings on the part or the PCB so I don't think so but I figure I would check here before soldering.

I have been cycling through pedals to get an instant "hard rock" sound through a Deluxe Reverb so I was interested to try this one. Pretty good!!

I made the holes a wee bit extra to account for the powder coating, more than the .2mm that Tayda recommends (.4mm-.5mm if I remember correctly). https://drill.taydakits.com/box-designs/new?public_key=YlBkK0dqVllJTmV3cTE1VHdhdVE1dz09Cg==