Search results

  1. P

    SOLVED Help with Total Bender (PCB Guitar Mania)

    Will go with what you said
  2. P

    Biasing the Photon vibe ,

    I will go with the mini but will finish other projects first ,I added a 47pf to the 470pf in the photon vibe this has added more low end thump ,no the low pot will not add that Wu Wu so it is cycling through the ldrs and adding that thump but a little brighter than the harbinger, Pedalpcb has...
  3. P

    SOLVED Help with Total Bender (PCB Guitar Mania)

    So NPN does not work in mark 3 ,I have enough NPN and PNP for this project ,I have built all three pedals in I25B will be great to have all 3 in one enclosure ,waiting for pcbs to arrive .I have built a fulltone 69 which is great and a sunface with real NKT275s the needs biasing all the time
  4. P

    Biasing the Photon vibe ,

    I have the harbinger by madbean ,and now have no more ldrs and light bulb ,banzai has them and smallbear ,I think the mini wil be the way Ill go after I have finished a few other pedals
  5. P

    Biasing the Photon vibe ,

    https://www.freestompboxes.org/viewtopic.php?t=507&start=20, Hope I can post this here it is about the phasing caps ,the photon vibe seems to have the same caps as the Univox 915
  6. P

    SOLVED Help with Total Bender (PCB Guitar Mania)

    If mk1 and MK2 are set for PNP ,set the voltage for NPN on the MK3 reverse the caps etc.,
  7. P

    SOLVED Help with Total Bender (PCB Guitar Mania)

    Have you tried metal case BC108-9 ,BC186 , GuitarPCB sells BC108-9s reverse caps
  8. P

    Biasing the Photon vibe ,

    Dosen''t seem to phase through the 4 ldrs like a univibe and is much more clean like the harbinger in modern mode .maybe one of the trimmers should be 250k,I have set it now ,didn''t blow the bulb .Not bad sounding.
  9. P

    Biasing the Photon vibe ,

    I have built the photon vibe and it is nice sounding ,so far haven't been able to get the thumping low end which I get from my madbean harbinger, and it doesn''t seem to phase through the four ldrs like the harbinger, also what does Tr 1 do ,biasing instructions would be great ,TR2 and TR3 seem...
  10. P

    Will it be possible to order a full Byzantium kit at musikding sometime soon, please ?

    I built your BF2 and it worked well, Since then had a go at a Ibanez Fl-9 from Perf and PCB and can only get clean sound he wont supply voltages in fact he didn''t reply to my message his facebook page is more marketing than help ,so can you have a go at a pcb for that less parts than the BF-2...
  11. P

    Missing Build Docs / Schematics

    Have you got the document for the super flare ,it is the only Pedal pcb project that has failed to work ,but far too many projects like this one without documents ,coming soon..................................................
  12. P

    Byzantium flanger no build docs?

    I built it and it works ,on the other hand I failed three times with the bf-2 pcb from a Polish company ,so yes this is verified ,what I did was I though of it as two easy to build pcbs that are joined with header pins ,tried not to stress and think it was complicated and it worked .Good luck
  13. P

    Will it be possible to order a full Byzantium kit at musikding sometime soon, please ?

    There is a Polish company that has a pcb and a kit ,a larger pcb than say 125b ,I tried three times to build their flanger but failed first time I built the pedal pcb worked first time .
  14. P

    Combining two effects in one enclosure

    Thank you for your help!!!
  15. P

    Combining two effects in one enclosure

    I''m going to give it a go- how I said one switch ,just finished the Mark11 tonebender tried it with the Mark 1 tonebender really nice together, once I finish a Julia chorus I''ll give it a go.
  16. P

    Combining two effects in one enclosure

    I want to avoid two switches the pic shows two
  17. P

    Combining two effects in one enclosure

    can you wire say an overdrive and a eq or boost in series using one switch ,the out from one pedal going to the in on the other pedal as above and the out from the pedal on the right going to the out jack and the ground points joined , the +9v going to the dc jack individually ,only one foot...
  18. P

    I want to add the flanger into an enclosure with an overdrive ,Phaser ,and analog delay where do I connect the wire from the other pedals 1-9 on the s

    You did help by insisting I connect to to the Main board ''in'' as this is the ''in'' normally coming from the 3dpt, I did connect to the Main board before your suggestion but without connecting the grounds it didn''t work ,till I connected the grounds that is ,I''m not set up to do a video but...
  19. P

    I want to add the flanger into an enclosure with an overdrive ,Phaser ,and analog delay where do I connect the wire from the other pedals 1-9 on the s

    Fixed : the problem was combining ground from one pedal to the other ,both pedals had their own power supply but you need to run a ground wire together ,running the out from the chorus to the main board as above works but you need to connect ground together, normally you go from 3dpt to 3dpt...
  20. P

    I want to add the flanger into an enclosure with an overdrive ,Phaser ,and analog delay where do I connect the wire from the other pedals 1-9 on the s

    so far soldering from chorus out to lug 1 or 2 has failed ,the trace from the input jack on the main board of the BYZ has continuity with lug 2 but that failed using DMM
Back
Top