Search results

I finished building my Deofol and it doesn’t work. The LEDs don’t even come on. I get bypass signal but that’s it. I have power to the LEDs, the IC, and all of the 2n5457s have power.

Just got done with Dirty Sanchez v2 and it sounds great! Virtually no noise even at highest gain setting. Big thumbs up on this one.

It calls for a 12n cap to go in C21. Will it make any difference if I put a 10n in that spot?

A Soldano SLO pedal would be really cool. I’ve seen a few over the last couple of days. Wampler had the SLOstortion and AMT makes the S1 and S2 and they are good.

What did I do wrong here? It works fine while both are on but I don’t pass a signal when they are off

I have noticed a couple quirky things with my Valhalla since building it. It has the same squeal/oscillation that my pineapple has when the gain is up around 2 oclock. Also when turning down the eq section all the way, it kills the volume. I run my cable from the power amp out to the front of...

This isn't really a troubleshooting post but more of a does anybody else experience this. My Pineapple distortion squeals with my Musicman Axis with volume all the way up. It doesn't do this with my Les Paul. It's hit or miss with different guitars. Is it because of the pickup output? Anybody...

Has anyone here combined circuits with other brands? How did it work out? Did they play well together? I've got some Guitarpcb circuits, mainly boost, that I was thinking about combining with a couple of the Pedalpcb circuits. Thoughts?

Finished up my Valhalla and it works great.

Thermionic OD. This is a great sounding pedal. I substituted 1N4148’s for the 1N5817’s and it is amazing. Another scratch built enclosure. Must have pedal.

I named it Train Wreck. I really like this pedal. Great sound. I built the enclosure for it as well. I also put a spdt on-off-on switch in it. It sounds great in the off position.

I need some help with my Thermionic OD. Just finished it and it has a crazy amount of noise and squealing. The D1 diode is getting really hot also. At first, the LED just below R34 would light up with 9 volt supply connected but now it doesn't. I've checked all caps and resistors, they are all...

Has anybody run there Thermionic on 18 volts? How does it sound? I'm almost done with mine and was just curious.

I can't get this pedal to do right. It sounds pretty good when the chord is struck but there is very little sustain and the notes just sort of fizzle out. I've tried a new set of J201's and still the same thing. I have tweaked till I can't tweak anymore and can't get it to act right. So I guess...

Has anybody built this board yet? There are no build docs as of yet and I have a problem with mine. It works but I have to turn the pot past half way to get sound. After turning past half way, it seems to work ok. Maybe bad pot?

Guys I need your opinion on what you would do here. On the Special Overdrive, it calls for an 82p cap at C5. I don't have an 82p. I have a 100p and a 47p. I don't want to place an order just to get an 82p cap. Which one of these do you think will have the least impact?

I guess today is not my day. Got the corduroy fuzz finished and it sounds great with the switch in the down position. But when you flip the switch up it drops the volume severely and the sound changes drastically. I checked the switch and it is good. I also swapped the LM386 to see if that...

I just got done building the thermionic deluxe and am a little disappointed with the gain. It doesn’t seem to have near the gain of the actual be-od pedal. The tight pot acts like a volume almost. Any ideas? The trimmers are all the way up also

I just finished the angry andy+ and when it is bypassed I lose most of my volume through the amp. When I turn it on it is awesome. Anybody else have this happen? Any ideas? I have been back through the pedal to see if there is anything obvious but I don't see anything.

I have a question concerning the channel LED's. I see that there LED's for the bypass and channel switch but is there an LED to indicate each channel? It doesn't look like there is. I guess what I'm asking is how do we know when we are in each different channel? Warren