Search results

Greetings! I built a 2-in-1 (signal chain flipper footswitch as well) pedal, the Delegate Boneyard Edition Compressor and the Greengage Overdrive. I get an obnoxious high pitch squeal when the Greengage/Plumes is on, goes away when off, goes away when both effects are engaged. The whistle...

Hey Y'all, I recently made a Artbiter Fuzz Face (Germanium)+Modded RAT Clone (Swapped in red LED's) and it sounds awesome on its own. Unfortunately it loses almost all signal when connected in series with other pedals. I'm almost certain I'd need to add an additional buffer into the circuit...

Greetings, I finished building the Maestro FSH-1 clone, the Minnow. Only half of it works. The envelope filter side only sounds a bit like it has a low pass filter on it, the knobs don't adjust anything. The sample hold sounds incredible and works like a charm. I'm double checking component...

Wussup Y'all!!! I need some help. I recently built a dual Conqueror Fuzz+Trumpeter Fuzz with a signal chain flipper. It sounds INCREDIBLE. Unfortunately, I added it to my pedalboard and the signal/tone is degraded pretty heavily, basically non-usable. My assumption is the need to add a true...

Hello. I just finished a Hylian Fuzz. I love it. I swapped the 2n2907 with a Soviet T308a. It sounds so damn good. The problem is...The volume level is just far too loud. Like explosively loud. A punishing volume level. I experimented by swapping out pot values above and below B100k, the...

Just finished a VIIB Vibrato and I love it, but I can't quite seem to grasp what the "Rise" knob does. Newbie question I know, but it doesn't seem to change much of the effect if at all when I move the pot around. Thanks in advance!

I recently was given an EQD Data Corrupter with a busted toggle switch and I'm in the process of sourcing the parts to repair myself. It's the Unison/-1 -2 selector toggle. Anyone know what kind exactly and where I can source it from? I've never replaced or ordered this type of switch. Thanks!

Hey y'all. I'm building a Bellum Fuzz MKII and I realized I don't have any 1n34a diodes. I do have a few 1t308a GE transistors and some 2n404 GE transistors. Is it possible to use those and if so, how would I wire them in the circuit. Thanks in advance!

Sup Y'all. I've been making dual effects with the 3pdt breakout boards for awhile now and I LOVE it. I've challenged myself to combined the Pendulum Harmonic Tremolo and the VIIB Vibrato. The Pendulum is a 3pdt footswitch configuration and the VIIB Vibrato is a SPST Momentary (normally ON)...

Hey y'all. I'm currently building the VIIB vibrato, and I've found some values that are pretty unusual. They are all capacitors. They are the following. Non-Polarized 33pf 200pf 2.7nf Polarized 6.8nf Is it workable to just use cap values that are more common that are close to what is on...

Sup y'all. I acquired an almost mint condition MXR M-206 Time Delay. Sounds okay, but with certain adjustment to the 3 internal trimpots, it picks up a high pitched hiss...The delay isn't as strong as the clips and videos I've watched. I'd imagine it's the SAD 4096 BBD chip going bad. Any...

Hey y'all. I just wrapped up a Panspermia Fuzz and I love it so far, but I'm having a really strange issue. I get a gnarly ground hum when I push the volume above 11 o'clock. I figured it was something internally so I traced the entire signal with a probe and a looped guitar signal...

Hey y'all, I recently did the feedback mod for the magnatron/keeley tape echo clone, and I love it! Is this possible to do the same thing to the chalumeau? I feel like this totally doable, but wanted to double check before I drill the enclosure. Thanks!

Hey y'all. I've done a handful of the tone bypass mode for the NYC version of the Big Muff Pi. I have the 4 5088 transistor version of the DBA Fuzz War, and was wondering if this was possible to do a tone bypass mod for it as well? I think it would be a cool mod. Thanks!

Hey gang, Like the title says, I'm on the hunt for one, cuz they are out of stock on pedalpcb. I found a very similar looking one on mouser that's listed as an adafruit one on Mouser. Lemme know if anyone has a source or lead! Thanks.

Greatings Y'all. I recently found a bad 2n5088 in my 4 transistor Fuzz War, the fuzz was only about halfway there and the clean signal was pretty present. I replaced it, and the fuzz is back! Unfortunately, I'm now getting a high pitched squealing noise. Goes away when I lower the pots. Any...

Hey gang, I recently got hit up by a buddy who has the DBA Echo Master vocal effect, and he was wondering if it's possible to add a footswitch to it so he can turn it on and off live? I'm wondering if this is at all possible. Thanks in advance!

Hey guys, Currently making an echo + chorus and I'm looking for some help. I've built a handful of dual effects with a 3pdt signal chain flipper with the help of the pedalpcb breakout board specifically for that. But for room sake, is it possible to do the same with a ON/ON toggle switch...

I'm looking to buy a SPST momentary footswitch for a feedback loop mod and I'm a bit confused. Should be purchasing a "normally closed" SPST or a "normally open"? I can't seem to figure out which one is the correct one for this mod. Thanks!

Hey gang, I've been making single and dual unit pedalpcb effects for the last year and a half and I'm absolutely obsessed. I'm consistently challenging myself with new ideas and recently had a friend ask about a rack set up. He's a synth wiz and plays in a band and asked if it was possible...