Search results

Anybody know of a resource that shows the frequency responses of some of the more common speaker cabs out there? Thinking ahead on how best to use this Unicab board once I get it into play. Tried the Omnicabsim users manual but came up dry.

So I got caught up in the Aoin fx sale frenzy and ordered the L5 pre Board. I had been looking at it for a while, but never pulled the trigger because of the lack of a balanced out. Well that and the $16 converter, but why let a little thing like money get in the way…. I know I had asked before...

Not a new build but I took this out of a combo build using an acetylene as a pre and it’s just been sitting there begging to be boxed and used so here you go…… The power Jack got a little off center, but it doesn’t make me go into a white knuckle, eye twitching rage at its abhorrence and...

So my build inertia has pretty well hit the wall, but I do still build some stuff. I have been pretty meh ab posting my bare bones builds. So why start now? Because reasons. First up is a Tearjerker Wah with all the Chuck D Bones bass mods: First let me say, if you are planning on building one...

This build report is 180° from my last one. aesthetically bare bones, but a beast of a board/circuit. This is only the second Lovetone clone I have built, the first being the PPCB Cheesemonger fuzz which is a considerably easier build. This is Aion’s clone of the Ring Stinger, a tricked out ring...

So this is not so much a showcase for a circuit (grudgingly cool though it may be) as it is a moment for me to share some (admittedly biased) cool pedal artwork done by my daughter. The artwork, hand painted in acrylic So, as far as the circuit, as stated, this is the MBP Chaos Agent which is...

I built a lamb chop awhile back for bass usage, but was pretty meh on it might try this mod, thanks for posting the link. From what I can tell C34 from the TB pic looks to be C26 (due to proximity to the Lm833 and it appears to be the only 1nf on the schematic*) on the Lamb Chop, can anyone...

Anybody got some good transistor combos/specs for the MBP Chaos Agent (NPN Fluzz Phalactory)? I know it’s a jacked fuzz face so presume the basic specs will apply, but just want to know what people have tried and liked.

I’ll start by saying it would probably be easier to just suck it up and buy a Moog ep-3, but having had one previously, it just feels cheap. So got to thinking, I have a 200k econo wah pot from small bear, what’s to stop me from building my own. That said, 200k is not a common pot value for most...

2 threads in as many weeks, where I have I gone so wrong with my building process!? Actually 90% sure this is a programming issue, but since this is my first actual Vero build (aside from pad per point protoboard), I wanted some more experienced eyes on this. This is a Parasit Bitbreaker deluxe...

Moar speed, Moar depth! MBP Harnbinger 2. I get effect, but it’s weak sauce as compared to the Electrovibe. Depth has to be cranked and the max speed is barely half of the electrovibe. The vibrato setting is barely noticeable unless at max speed. I have checked components (several times in the...

Ok, so I am trying to upload the hex file provided by Parasit for his Bitbreaker deluxe and I am at my wits end. I am using a USBtiny programming stick (that was kindly sent to me by none other than @fig) and after a couple of days have gotten the right downloads and setup for AVRdude to talk to...

Somebody please explain how/if this works. Specifically, how does this pass signal to the out jack when in bypass? I have wet signal when pedal is engaged, but nothing when off. Do my eyes deceive me, or is there no direct switched connection from in to out, only out from the effect. Orange wire...

A few boards here, a few boards there, a sale or two….. adds up to a lot of friggin builds. This will require multiple posts. First is not a new build, but a rehouse. A PPCB Acetylene. This was acting as a preamp for a headphone amp, but in a search for a decent pre to be used in front of a DI...

Used the basic latching relay switching on a commissioned build I recently passed to the “customer”. He told me (and sent a video) that if he leaves the pedals (2 in 1 build) on and kills the power at the board, when he turns the board back on (even after 24hrs) the LEDs on the pedal will be...

This was supposed to be a simple easy a/b/y box with switchable PPCB simple Jfet buffer and yet….. The symptoms come down to if I have the ground wire from the power jack to the right output jack sleeve, the buffer works beautifully, if I remove the out jack ground wire, (almost) jack shit...

So is implementing a balanced out (XLR/TRS) as easy as simply splitting the mono Tip signal to the Tip and Ring of a TRS jack (then using a TRS->XLR adapter cable)?

Finished this batch up last week: Effects layout Skeleklone mk2 After being educated by smarter folks here and finding out that 1044scpa charge pumps are the noisy devil and upon suggestion of aforementioned smarter folk, I jumped on buying this board during the effectslayout sale. So, does it...

Did I solder this upsidedown? The one that came with my Skeleklone said “3pdt this side” but not this one (that I can remember or see) but I’m getting no LED and no sound

So I finally went and ordered the harbinger 2 board that I have debated over forever and am now collecting the parts. Amplified Parts has the wah shell and pots, but I need confirmation that a 100k audio wah pot (that AP carries) will be interchangeable for the ICAR pot called for in the build...