Search results

  1. thesoundofjusticefx

    SOLVED Caesar Chorus Clock Noise on Bypass

    Thank you that fixed it right up. I usually run my in/out wires under the pcb for the center. I’m gonna have to rethink that for effects like this. I’ll post pics soon.
  2. thesoundofjusticefx

    SOLVED Caesar Chorus Clock Noise on Bypass

    Hello friends. I built the caesar chorus today and on bypass I get a clock noise with the speed of whatever the rate knob is set to. Any ideas? Haven’t tried replacing the chips yet but I have tried different cables and power supplies and powe me cables. Even with no input cable connected, only...
  3. thesoundofjusticefx

    TSO Fat General

    Here’s some shots of the fat general. I used the same transistors the schematic states even though I tried others with varying results. Do yourself a favor and heat shrink the ldr and green led (I used 5mm high intensity clear from Tayda). This gave me the strongest and overall clearest results...
  4. thesoundofjusticefx

    Prince of Tone (Pauper) Question

    This helps a ton cuz I’m working on a hi gain side right now. But a question I have is it looks like the hi gain mod has the lowest knob setting with 100k of gain. Then with the potentiometer goes to 200k for gain. Looks like the gain starts high then goes higher rather then a low to high gain...
  5. thesoundofjusticefx

    Paragon - Modification questions

    Quick question. With the high gain resistor does the gain control still get a full low to high gain range? Looking at the schematic it looks like the gains starts as if the gain was maxed then goes higher from there. Thanks.
  6. thesoundofjusticefx

    Collar Drive Overdrive Pedal - Similar to Menatone Blue Collar

    This looks incredible. Would you mind sharing which schematic or link to reference you used? I have a friend who want me to build him one and I see an early and later version. This kinda looks like the early version. Thanks.
  7. thesoundofjusticefx

    Which two are different from the others?

    Whoa those look incredible!!!
  8. thesoundofjusticefx

    Electrovibe

    Yes that's him. Thanks you @Big Monk
  9. thesoundofjusticefx

    Electrovibe

    Thanks. There is an electrovibe thread that I used here in pedalpcb and one of the main contributors was (I forget the name) @bmonk/@badmonk... something like that. Then you can look online for a version called "the forum vibe" and it's a community collaboration and it's solid with 3 or 4...
  10. thesoundofjusticefx

    Electrovibe

    It seemed to respond just fine without the light box cover. Internally one was white and the other was chrome (which sounded better). If I remember I seemed to be able to get the same response of the chrome lightbox and no lightbox by adjusting the distance of the photocells and adjusting the...
  11. thesoundofjusticefx

    Electrovibe

    I finally figured out the issues and finished up this build. It's amazing how fine tuned the bias, gain and dry and wet signal mix resistor sections are. I ended up making some minor adjustments to tweak the gain and bias easier and I did the effect (dry/wet) mix trimmer to get a slightly deeper...
  12. thesoundofjusticefx

    For those who have built the Skeptical Buffer....

    Thanks. I designed them myself using the simple 555 timer based relay system. The arcade buttons are fun because of the look and sound. It sounds like an arcade when you’re hitting em. Then I wanted them to light up so I made a couple utility boards using as much surface mount components I can...
  13. thesoundofjusticefx

    ElectroVibe Modifications Thread

    Have you tried removing that 250k trimpot and using the usual 100k and 47k in its place? I’ve seen some schematics using 200k as well.
  14. thesoundofjusticefx

    ElectroVibe Modifications Thread

    I agree. And it’s definitely in the ball park. I can hear it but it’s just not as pronounced in the low end. Then that double whomp whomp. It’s in there but just as prominent in the lows. I’ve gone over the values so many times. I’m wondering if one of my ldr’s may not be working? I found...
  15. thesoundofjusticefx

    ElectroVibe Modifications Thread

    Using 9203
  16. thesoundofjusticefx

    ElectroVibe Modifications Thread

    This is where I’m at too. Your mods and notes have been extremely helpful. I just can’t seem to get that heavy throb that almost sounds like a double throb. I’ve tried different photocell distances form the lamp, different lamp brightness with offset and gain trimmers and using two different...
  17. thesoundofjusticefx

    SOLVED Electrovibe Bit-Crush Sound

    Hello brain team, I am getting more of a bitcrush sound with the chorus mode with really low volume. The tone is very flat mid focused as well. When switching to vibrato mode there is no modulation, only the preamp sound. Same tone problems. I’ve made a couple of mids like the faster rate, unity...
  18. thesoundofjusticefx

    For those who have built the Skeptical Buffer....

    Here's the front pic. The other is the Buxom Boost... seriously one of the best boosts. And I agree, I think widening the space of the toggles would help. It can also be very tight with the clandestine preamp toggle placing too... but it does look nice when it's all assembled.
  19. thesoundofjusticefx

    For those who have built the Skeptical Buffer....

    Here is a pic of my build. I did a couple modifications so don't mind the component ugliness, lol. I didn't use the pdf drill template, I used one from keech design. But I'm not sure where the drill holes are at on the pdf drilling template. I've been using closed jacks from lumberg cuz they are...
Back
Top