Search results

So the drive side sounds fantastic, but the boost doesnt seem to work! If I max out the volume, it farts out very very softly, bit like if I had to fart in a lift. Tested the op-amps and they're good! Bypass works ok as well. Left out the LDRs - which I don't believe affects the sound.

Anyone have Tayda drill template for this?

So I recently got a batch with HFE between 100 and 200+, and leakages between 500 & 1000. I know a EQD Tone Repear sounds great even with those mad values from my personal testing. Am also looking to experiment with dizzy tone circuits, where I know q3 requires some leakage to bias properly...

Excited to build this one!

Would this be possible, and how would it affect the pedal? Mainly because I can't find a b50k dual with PCB pins

Can anyone decipher what value this resistor is? Looks like a 1m to me, but I'm not 100% sure

Hello, thought Id try and see if anyone has similar issues before i take apart my board and check my soldering I can hear modulation with rate and depth maxed, but i cant get rid of the distortion. the Mn3207 chip is legit, tried it out in another chorus pedal i have and its silent. Any...

Pretty much what the title says, anyone know which parts values should be swapped out?

Posting this in case anyone has faced a similar issue - I reflowed the solder on my footswitches and that did the trick!

Hey everyone, I'm building a Duellist clone from Aion FX and it calls for a c150k pot for the bluesbreaker channel gain control, but I only have a c200k pot. What effect would changing this value have on the circuit? Curious to know the more technical details too if anyone knows! Always wanted...

Hi the build guide calls for 2 100nf film capacitors but I'm missing one atm. Could I get away with using a 100nf MLCC capacitor? Since it's not in the audio path.

Wished Id never had to post here, but here we are. Bypass, mix, and level knobs work well. Gate knob is kinda weird, seems to respond to the trimpots? But the main issue is I'm getting zero modulation motion on the pedal on any knob setting, even after trying to bias the BBD.

So I definitely think there's a benefit to using carbon zinc batteries over alkaline ones in germanium fuzzes, that's been my personal experience at least. Now my question is this, does a charge pump negate any difference in the power source? And the questions that underlie my original one -...

Hi i'm not very familiar with circuitry, so wanted to confirm how the offboard wiring for this works. I wire the power and ground cables to both the effect pcb as well as the bypass pcb, wiring the 4 cables up as per usual, then the in/out cables to the bypass pcb?

I want to make this mod for the stupidest reason - so I can buy the Tayda 6-knob predrilled enclosure. From what I can tell from the build docs, the 5-knob one Tayda carries wont fit. Wheres a good place to insert a variable resistor to get varied fuzz tones from this pcb?

So I wasn't sure else to ask this, but does anyone have a template for VFE pedals builds from madbeanpedals? Would ask it on the madbeanpedals forum, but it seems more likely that I would get a reply here! I'm also making some customs enclosures for a 3knob and 5knob pedalpcb, just expanding...