Search results

Tried a Boss SD-1 and really liked it, so I bought the Uber Drive. Are there any good mods to lower the gain a little bit?

Built the Clandestine Preamp, works okay for the most part but I'm having a few issues. 1) The volume has a slight drop once the pot is turned all the way up 2) Not much, if any, difference between the mid and the dark settings. 3) The bias voltage seems a little strange, the lowest voltage I...

Built an 808 clone and compared to the XB-MB I built, it's kind of dark. I know I could use LEDs for the clipping diodes but that's not really the type of gain I want from the pedal. Any other ways I could brighten it up?

I noticed the volume pot is a linear taper and was wondering if it would affect anything if I changed it out for an audio taper instead. The volume jumps up real quick

Just built this cleaver boost and the sound is muffled, like a tone knob is rolled all the way down. Not sure what I did wrong...

Built the Double Jeporady Boost, and I'm reading around 12 volts with the trim pots turned all the way down...

I'd like to add a voltage starve circuit in my fuzz face build and was wondering if anyone had a diagram for this type of mod. I've also heard there's various ways of doing it, any info would be greatly appreciated.

Anyone have the wiring diagram for the Angry Andy +? Wondering what boards I need for each footswitch...

Anyone have a copy of the Angry Andy Plus drill template?

So I wanted to add a jack for an expression pedal like EQD has on the new ones. I found something online as to how everything should be hooked up. The distortion and boost worked as should but when I turned on the octave it lowered the output, and after I plugged a stereo cable in, it didn't...

Juse built this Carmine OD, sounds okay but seems like the volume level is off, too low. The transistor hfe is 80, only thing I intentionally changed was the resistor value for the LED.

Wondering if anyone has built both the Box and All (EQD Tone Job) and the 6 Parameter EQ pedals. Both have good reviews, just wondering what the differences are between them and advantages one might have over the other.

What gain should the 2n222a be for the Dragons Breath? I had some spare ones in a bag someone gave me and they read about 160 to 180 on my tester.

What hfe value should be used for the OC139 in the Carmine OD?

A while back I got a mod kit off Ebay for my stock Ibanez TS9, converted it closer to 808 specs, and also ended up changing some values of the low pass filter. What those values were I can't remember off the top of my head, I'll have to open it up and double check, but I really liked the way it...

Just wondering if wiring these two order switches would work this way...

Doing this 3 in 1 drive/boost build. Greer lightspeed/mach 1 circuit is the first drive, next is the j rockett klon/archer/ kliche boost is the middle circuit, and a katana/cleaver boost is the last one. Would it be worth putting order switches in or is it not going to have much of an effect...

So do you wire everything Iike it is in the pic, or do you still need grounds coming off the jacks onto the board.

Just finished putting this tremolo pedal together, and I'm getting output but just a volume boost, no tremolo effect. Reflowed some of the solder joints and still have the same issue. Anything I can check for?

Built the dark esbat and didn't have any output. Had some inconsistent voltages on the ic chips, switched them around to see if I could pinpoint if the ic was bad, then they all started reading 9 volts instead of 4. Anyone have the voltages for the test points?