Search results

  1. T

    Fuzzy Fox - capacitors

    That's a great point about tolerances!
  2. T

    Fuzzy Fox - capacitors

    A long search on the forums did not allow me to understand why the 10u electrolytic capacitors that connect to the bases of Q3 and Q4 have different polarities in schemes and layouts (Pedalpcb, Fuzzcentral, GuitarFXLayouts, Sabrotone, GGG, etc.). Madbean uses 1uf film and it confuses me even...
  3. T

    EHX Small Clone / Bass Clone

    I built a Small Clone for guitar and wanted to include bass and treble controls, just like the EHX Bass Clone. That's why I asked about this schematic.
  4. T

    EHX Small Clone / Bass Clone

    I used a 125B with a mix control, and the switch is to change the capacitor from 150pf to 50pf or 270pf
  5. T

    EHX Small Clone / Bass Clone

    My knowledge of electronics is too poor to answer one of these questions. I built a Small Clone of Guitar FX Layouts as LEGO. I thought about trying something like the AMZ scheme in the image but I don't know if I'll have space in the enclosure.
  6. T

    EHX Small Clone / Bass Clone

    It's really rare to see pedals for bassists on the wish list. I'm curious if this is very different from Small Clone and if it is possible to include bass and treble controls.
  7. T

    EHX Small Clone / Bass Clone

    My expectation was to be able to replace something in the existing circuit, without creating an auxiliary board.
  8. T

    EHX Small Clone / Bass Clone

    The bass version of the EHX Small Clone (EHX Bass Clone) has treble and bass controls. I can't find a schematic available for this pedal. Any ideas on how to implement these controls in Small Clone?
  9. T

    Current Lover 2023

    I really wanted to have a blend control for the Electric Mistress. Is there any way to do this?
  10. T

    Missing Build Docs / Schematics

    I'm very curious about the schematic of the Octuplet Octave, as I thought the octave part of the Octron was the same as the red zimcard, but this one uses only one chip. Octuplet has 3
  11. T

    DEMO Octuplet Octave

    Would this circuit be the equivalent of the Foxrox Red Zimcard?
  12. T

    Fuzzy Fox caps

    I have a doubt about the polarity of capacitors C6 and C11 of the Pedalpcb schematic. It is the same as the central fuzz schematic and different from the GGG schematic. In other internet schematics there is also this polarity variation. Is there a correct way?
  13. T

    Thanksgiving Week Madness - Gnat (Buzzaround) + Super 64 (Superbolt) in one

    Rotary 1 is for C1 and rotary 2 is for C6,C7. Is this correct?
  14. T

    Flanger To DIY or not to DIY?

    I have a Mooer Eleclady and I'm going to try a buff 'n' blend with it for a mix control. Rehouse Eleclady would be too complicated, so my plan would be to build this EVM2 pcb and include the mix (if it fits a 125B).
  15. T

    Flanger To DIY or not to DIY?

    Did you build the pedal? let me know what you think
  16. T

    Flanger To DIY or not to DIY?

    Did you build the pedal? let me know what you think
  17. T

    Flanger To DIY or not to DIY?

    I would like to know too. You got it?
  18. T

    Electric Mistress - mix control

    I would like to go 100% dry to the standard Electric Mistress. (I hope the terms are correct).
  19. T

    Electric Mistress - mix control

    Electric Mistress is a project that is on my radar, but I would like to have a mix control. If I put a B50K potentiometer in series with the resistor R18 (10K), would I be able to control the amount of effect and dry?
  20. T

    Uni Vibe preamp

    Thank you so much! Hope this can be similar to Uni Vibe with "cancel" mode enabled because it sounds great
Back
Top