Search results

Anyone able to tell me the voltages for Q2 in the Bellum MK1 It's not for troubleshooting I just happened to pick this schematic to work out voltages and my thick skull can't work it out Thanks

Bought one of these a while back based on you can put signal through anything that conducts https://www.ebay.co.uk/itm/193774631445?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=gVVg5_8mTwG&sssrc=2349624&ssuid=VraIHHfoTvS&var=&widget_ver=artemis&media=COPY Put it in a drawer and forgot about...

This sat in a drawer forgotten about worked apart from tails Couldn't suss which of the 4 switches it was on the schematic to check it Anyway contacted Cees (skidmark) the designer who said the switch labelling on the schematic was confusing and sent me some trace screenshots a coupla jumpers...

Fuzzdog DBA reverberation machine with the feedback mod and momentary switch First try at the water drop painting technique as per I glanced quickly over the instructions watched a wee bit of a vid and went for it Looks nothing like water drops more like a meteor shower but kinda cool has a...

Almost perfect toner transfer onto a power coated Gorva enclosure bit of a tight fit but just about got there you can see my efforts painting the inside to insulate it, it didn't, just smells of paint fortunately nothing was touching the bare metal LPF went a bit wonky with my over zealous...

A wee build report The bellum mk2 along with a samurai (Katana boost) from me pal at five cats Drilled the samurai toggle hole the wrong side hence the long bits of wire Because I'm an idiot For young Robbie another wee plug for him coz he's a good lad and he likes DBA stuff a freebie...

Here it is my first p to p meets SMD effort an effects layouts, layout of the DOD 250 grey spec a bit wonky in places and I melted a wee bit of that damn 2N2, but it works! Inspired by elephant pedals the king of PtoP and a good Scotsman as well

Here in case anybody want's it is a coupla calculations for altering and checking pot values e.g if you need a 20K but only have a 50K these will tell you what resistance you need in paralell and let you check how close you got to your desired value, I can't remember if I already posted it so...

First delve into my OC44 stash this one 83 hFE 0 leakage from an old Roberts R200 radio and 1st gorva enclosure seemed a shame to etch it, they're that nice and a bk butler Mosfet tube driver featuring aluminium plates from a previously drilled enclosure for a cover up and re use job

This one's been in my pcb drawer for well over 7 years For a single PT2399 delay it's sounds excellent added all the mods the runaway repeats footswitch is great for dub type sounds at medium delays all round a great little pedal, just a simple iron on toner transfer and a couple of clearcoats...

People in Glasgow actually thought this was Steven Gerrard the Rangers manager being lauded for winning the Scottish premier league title In actual fact it was Chuck arriving to help a guy that had been trying to fix his fuzz build for over 3 weeks and word got out Well deserved if you ask me...

Good sounding pedal Just about got away with sticking it in a 1590B like a gimp I used the drill template for pot and switch holes so wasted a bit of space Could have pushed the pots up a bit and switch down a tad but had already labelled and etched it before I realised the drill template is...

Reverse etched and believe it or not this is all the same colour 1 solid 1 translucent both Montana Gold Cherry Blossom Translucent on bare metal = pink I usually do the etch in black and spray over it with the translucent adds a wee bit of easy colour to your etch Great sounding pedal with...

Slight challenge this one, it's one of the dead astronaut fx abductor pcb's with no silkscreen so had to concentrate and couldn't let a good deal pass me by! Nighmare trying to squeeze it into a 1590BB I had to chop bits off the DC jack etc doesn't look great inside but I just wanted it in...

Nice easy build only etched the logo just left the toner transfer and clearcoated the front My 'say what you see' naming convention hasn't worked too well though 'What is it?' 'Say what you see' Girl popping out a cake distortion? Birthday girl overdrive? Lovely lady fuzz? Guess my hot cake...

First build post in these parts! an electric druid flangelicious circuit this is the four knob version nice easy build with Tom's Flange chip cutting out a lot of the normal Flanger circuit parts, making it simple to build and even simpler to set up, etched the enclosure and for a change didn't...