Cucurbitam0schata
Well-known member
Hey Folks - I was going to use Tayda's custom drill service for a Chaos Machine 1590XX enclosure. Before I submit my order, I'm wondering if anyone else has done this already, and wouldn't mind sharing their measurements. Here are mine using PedalPCB/Tayda's format:
SIDE | HOLE NUMBER | HOLE DIA: | X: | Y: |
A | 1 (7mm pots) | 7 | -35.6 | 48.9 |
A | 2 | 7 | 0 | 48.9 |
A | 3 | 7 | 35.6 | 48.9 |
A | 4 | 7 | -42 | 17.25 |
A | 5 | 7 | -14 | 17.25 |
A | 6 | 7 | 14 | 17.25 |
A | 7 | 7 | 42 | 17.25 |
A | 8 | 7 | -27.9 | -8.45 |
A | 9 | 7 | 27.9 | -8.45 |
A | 10 (5mm bezel for LED) | 5.7 | 0 | -38.1 |
A | 11 (stomp switch) | 12 | 0 | -56.5 |
SIDE | HOLE NUMBER | HOLE DIA: | X: | Y: |
B | 1 (output) | 9.5 | -40.6 | 7.6 |
B | 2 (9V jack) | 7.9 | 0 | 2.85 |
B | 3 (input) | 9.5 | 40.6 | 7.6 |