Chucks Bass Kliche

[K Pedals]

Just got it finished… everything fit on the full size kliche except C2 (1uF)… but it fits perfectly under the board…
This thing sounds amazing on bass, which I expected but also sounds amazing on guitar too… which I wasn’t expecting… anyway Amazing job Mr Bones!¡

 

[Deperduci]

think i got some 1uf mlcc’s from digikey or stomp box, might have kept it topside but good to know it works for the whole family by ppcb

 

[Robert]

Nice!

Might have to see about increasing the spacing around C2 in the future to make it easier.

 

[MichaelW]

How does it sound different than a regular Klon on guitar? Now I'm intrigued.......

 

[K Pedals]

I need to do a shootout…
I haven’t A B’ed them …

 

[peccary]

That was fast!

Any chance of a sound sample on bass?

 

[DAJE]

Any reason a Boneyard Bass Klone wouldn't work on a Kliché Mini PCB?

 

[Bricksnbeatles]

Any reason a Boneyard Bass Klone wouldn't work on a Kliché MiniPCB?

Not at all. That’s what Chuck’s is built on in his thread

 

[Mentaltossflycoon]

Any reason a Boneyard Bass Klone wouldn't work on a Kliché MiniPCB?

That's what I just ordered. It's a conspiracy though... notice the article drops right after the coupon code ends? Bugg n Chuck are in cahoots! Just like the addictive chemicals in the colonels chicken.

 

[DAJE]

That's what I just ordered. It's a conspiracy though... notice the article drops right after the coupon code ends? Bugg n Chuck are in cahoots! Just like the addictive chemicals in the colonels chicken.

I'm going to be adding a Kliché Mini PCB to my next order, for sure. No hurry, though. I can wait for the next sale. Probably.

 

[DAJE]

Not at all. That’s what Chuck’s is built on in his thread

Yes, obviously, now that you've pointed it out.

 

[Deperduci]

now i wonder which versions of tl072 to use this has a pair of P’s, chuck’s mini uses an IP for 1 and my current stash are CP’s….

 

[K Pedals]

now i wonder which versions of tl072 to use this has a pair of P’s, chuck’s mini uses an IP for 1 and my current stash are CP’s….

I read somewhere TL072IP are less noise?¿
I don’t really know the difference…
I used all of them before…

 

[Feral Feline]

I'm keen to see such a klean Klon Klone.

The white power jack is the icing on the white cake, but this build is no blanc-mange — very tasty!

 

[K Pedals]

I'm keen to see such a klean Klon Klone.

The white power jack is the icing on the white cake, but this build is no blanc-mange — very tasty!

Thanks¡!

 

[Chuck D. Bones]

I read somewhere TL072IP are less noise?¿
I don’t really know the difference…
I used all of them before…

There's no electrical difference. The I-suffix part is rated for the Industrial temp range: -40C to +85C. The C-suffix part is rated for the Commercial temp range: 0C to +70C.

 

[Chuck D. Bones]

Very clean build!

Nice!

Might have to see about increasing the spacing around C2 in the future to make it easier.

Needed on both boards. It was very snug on the Mini.

 

[Deperduci]

if it’s about temp rating and not thd I’ll use my cp’s they end up anywhere below 10C/55ish F then it’s not even in use.

I wonder if why I didn’t like a regular klon is same reason this mod still sounds good on guitar, the bass end not being lost/to trebley

 

[K Pedals]

if it’s about temp rating and not thd I’ll use my cp’s they end up anywhere below 10C/55ish F then it’s not even in use.

I wonder if why I didn’t like a regular klon is same reason this mod still sounds good on guitar, the bass end not being lost/to trebley

Yeah I’d think so…
It really didn’t sound that anemic until I built this one…

 

[Dan0h]

Awesome. Going to have to build one now too.