- Build Rating
Continuing on my backlog of Dead End FX PCBs, here's Sprocket, Spaceman Effects Space Rocket I clone. Taking my learnings from the previous pedals, I adjusted the level at which I placed the knobs and gave myself enough clearance to have all top inputs.
I had to make some small adjustments on resistors since they had some really funny values but one was for a CLR and the other was for a bias on a transistor, I had 430r and it wanted 420r; the 430r didn't really change much at all.
Like the other two pedals, I just marked it up with a paint pen. I'm going to do some laser cut face plates from Amplify Fun once I can get them designed and I'm happy with the results.
The pedal itself was a pretty straight forward build and no surprises other than the resistor substitutions.
I had to make some small adjustments on resistors since they had some really funny values but one was for a CLR and the other was for a bias on a transistor, I had 430r and it wanted 420r; the 430r didn't really change much at all.
Like the other two pedals, I just marked it up with a paint pen. I'm going to do some laser cut face plates from Amplify Fun once I can get them designed and I'm happy with the results.
The pedal itself was a pretty straight forward build and no surprises other than the resistor substitutions.
