These have been available since around 2006That looks great!
What mini pots did you use for the trimpots? I'd love to do that for a few builds.
Yes, They work as Gain Cut controls as you rotate Clockwise being Flipped but very handy on top!Nice and clever trick with the trimmers!
Very cool! Thanks!These have been available since around 2006
The Knob is captured by a claw style and can be unclipped from the Trimmer if needed.
i used them in my Barber Small Fry Burn Unit build also.
Tater Tot
This was recent & listed on the old Forum & lost. A great Versatile Pedal! Used 3362 Internal Trimmers with Knobs for Bass, Mids & Presence. Mods: Battery Clip & Stereo Input Jack.forum.pedalpcb.com
The reason for the deeper box is the Transformer sits too high using standard right angle PCB Pots & toggle switch.@music6000 - thanks. I bought a regular BB without realising so I think I will get another enclosure.
I’m gonna give this a shot in a BB. I just gotta find something better to trim those pot legs down with. Great looking build!The reason for the deeper box is the Transformer sits too high using standard right angle PCB Pots & toggle switch.
If your not OCD about being central, Offset PCB Drill temp to the left to give you more clearance for toggle switch fitment like mine without filing edge of PCB!I’m gonna give this a shot in a BB. I just gotta find something better to trim those pot legs down with. Great looking build!
OCD would get the best of me I’m afraid. What I may do is mount it the on side of enclosure somewhere. Thanks for the info!If your not OCD about being central, Offset PCB Drill temp to the left to give you more clearance for toggle switch fitment like mine without filing edge of PCB!
I used a Dremel with Cut Off Disc to modify pot legs, Sealed pots with tape so no metal dust gets in!
It can probably go in between the foot switches?OCD would get the best of me I’m afraid. What I may do is mount it the on side of enclosure somewhere. Thanks for the info!
Between the power jack & Input jack is where I would mount it, make sure you use a short lever, you can screw the toggle inside nut out so it keeps nice and flush on outer nut thread, That way it wont foul right angle Audio Jacks!OCD would get the best of me I’m afraid. What I may do is mount it the on side of enclosure somewhere. Thanks for the info!
This is super cool. Just out of curiosity.... If I wasn't aiming to get the trims on the outside, would it be feasible to move the transformer offboard (between the foot switches) and still pack in in a regular 1590bb? SHouldn't need to shave the pot lugs down or relocate the toggle? I really like the idea of a regular depth box and I can't see 6 wires and a glob of hot glue to hold the thing down all that much in the way of extra work.... some of those larger electrolytics looks pretty tall.... maybe those need to be wired in leaning or something.A Great Sounding Pedal!
Mods: Toggle Switch with Leads, PCB filed to suit!
Trimmers to the opposite side of PCB.
16mm Right Angle PCB Pots shortened.
View attachment 7963
View attachment 7962