Electric Mistress - mix control

[taxfree]

Electric Mistress is a project that is on my radar, but I would like to have a mix control. If I put a B50K potentiometer in series with the resistor R18 (10K), would I be able to control the amount of effect and dry?

 

[finebyfine]

I'm not personally familiar with the circuit but that is exactly where I would trying placing one if I were trying to do the same

 

[Big Monk]

Try reading here:

This Week on the Breadboard: The 'lectric Mama Flanger

I wanted to build something using the recently acquired V3207D and MN3102 chips, so here's the first pedal out of the gate. It's a flanger based on the EHX Electric Mistress, with some updates and mods. I remember tracing an Electric Mistress back in '77. The design is both minimalist and...

forum.pedalpcb.com

 

[Chuck D. Bones]

Electric Mistress is a project that is on my radar, but I would like to have a mix control. If I put a B50K potentiometer in series with the resistor R18 (10K), would I be able to control the amount of effect and dry?

Yes, but you'll mess up the equalization AND
you need to be more specific:
Do you want to be able to go 100% dry?
Do you want to be able to go 100% wet?

 

[taxfree]

Yes, but you'll mess up the equalization AND
you need to be more specific:
Do you want to be able to go 100% dry?
Do you want to be able to go 100% wet?

I would like to go 100% dry to the standard Electric Mistress. (I hope the terms are correct).