IN PROGRESS Fortin Natas
- Thread starter VanWhy
- Start date
Laundryroom David
Keyboard Cowboy 🤠
Daaaaang. That does sound like fun.
Laundryroom David
Keyboard Cowboy 🤠
I like it
Was that what was inside the gooped square bit?
Robert
Reverse Engineer
Yep, part of it. I have no logical explanation as to why half of it was gooped (okay, sure I do, but anyway)...
There is apparently some controversy surrounding the original source of the Girth/Grind controls, I suppose that's why they were gooped.
Turns out it's not exactly a TC pre, but I'd assume it's accomplishing a similar task in front of the rest of the circuit.
There is apparently some controversy surrounding the original source of the Girth/Grind controls, I suppose that's why they were gooped.
Turns out it's not exactly a TC pre, but I'd assume it's accomplishing a similar task in front of the rest of the circuit.
UtilityBeltFX
Well-known member
ATNAS
GizzWizzKing
Well-known member
NOTASS ?
or
SSATON
or
SSATON
paulbarrette
Active member
I was going to request a natas pcb but if you are already looking into it i think that would be a great one to build. I would be up for one. I looked into buying one a few months ago. They are really expensive. The metal guys love them.
Pb
Pb
owlexifry
Well-known member
informative bump.
listened/watched this podcast with Kyle Rasmussen (Vitriol) recently, and at the 1h15m mark they go over his board.
probably one of the most hectic boards i've ever seen for an extreme metal artist:
- runs stereo to two separate amps.
- x1 side features the fortin natas.
- the other side features a friedman IR-X
don't normally get aroused by pedal boards, but this was a pretty nifty setup
for that much coin, you could get yourself a used DSL20
listened/watched this podcast with Kyle Rasmussen (Vitriol) recently, and at the 1h15m mark they go over his board.
probably one of the most hectic boards i've ever seen for an extreme metal artist:
- runs stereo to two separate amps.
- x1 side features the fortin natas.
- the other side features a friedman IR-X
don't normally get aroused by pedal boards, but this was a pretty nifty setup
yeah. fortin is really taking the piss with that RRP.
for that much coin, you could get yourself a used DSL20
Last edited:
fontoponto
Well-known member
What‘s the status of this project?
I would recommend „pensi“.
I would recommend „pensi“.
CR0SSBL4DE
Active member
Hi! Any news on this project?
