PangeaDestructor
Active member
All my build problems lately seem to involve low output. I got the Honeysuckle wired up and was a little surprised by how low the volume is, while the toggles do very little and the drive control is pretty subtle as well. I did make two substitutions using what I had on hand at the time, namely a TL072 in lieu of the 4558 and an A100k for the volume instead of a b100k. I now have both of those and can swap them out, but wanted to get some input here before doing so if that's unlikely to be causing the issue. I just went through the BOM and confirmed all the other component values.